Sökning: "short-term creep"

Visar resultat 1 - 5 av 16 avhandlingar innehållade orden short-term creep.

  1. 1. Anisotropic Mechanical Behaviours and Thin-wall Effects of Additively Manufactured Austenitic Alloys

    Författare :Cheng-Han Yu; Johan Moverare; Ru Lin Peng; Christian Leinenbach; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser powder bed fusion; Slow strain rate tensile testing; Short-term creep; Low cycle fatigue; Neutrons; Anisotropy; Crystallographic texture; Microstruc-ture; Dislocation structure; Lasersmältning i pulverbädd; Provning med långsam töjningshastighet; korttidskryp; Lågcykelutmattning; Neutroner; Anisotropi; Kristallografisk textur; Mikrostruktur; Dislokationsstruktur;

    Sammanfattning : Additive manufacturing (AM), also known as 3D printing, is a general concept of building a three-dimensional object layer-by-layer. AM breaks through the manufacturing limitations in conventionally subtractive manufacturing, leading to a great design freedom of components with complex geometries. LÄS MER

  3. 2. Structural Behavior of Reinforced High-Strength Concrete Columns

    Författare :Christina Claeson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; sustained loading; columns; slenderness; finite element analyses; nonlinear fracture mechanics; high-strength concrete; short-term loading; eccentricity;

    Sammanfattning : The high compressive strength of high-strength concrete is especially advantageous in compressed members such as columns, which can be made more slender and, consequently, make economic benefits possible. However, the behavior of high-strength concrete columns is not yet fully understood. LÄS MER

  4. 3. Development of a new generation of creep resistant 12% chromium steels: Microstructure of Z-phase strengthened steels

    Författare :Masoud Rashidi; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; phase transformation; CrNbN; impact toughness; Creep; CrTaN; Laves-phase; atom probe tomography; precipitation hardening; M2N; MX; transmission electron microscopy; coarsening;

    Sammanfattning : Fossil-fuel fired steam power plants provide more than 60% of the electricity generated worldwide, and account for about one third of the global CO2 emissions. Increasing the steam temperature and pressure leads to a higher thermal efficiency of the power plants and thus lower emissions. LÄS MER

  5. 4. Nonlinear Creep Model of Paper and Corrugated Board Materials

    Författare :Poorvi Patel; Teknisk logistik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Technological sciences; Finite element modeling; Creep-recovery tests; Schapery creep equation; Localbuckling; Orthotropic materials; Teknik;

    Sammanfattning : Models of the nonlinear creep behavior of paper, and of the global buckling , local buckling and creep buckling of corrugated board have been developed. The studies of creep and buckling were limited to climate conditions with constant relative humidity. First the short-term elastic buckling of corrugated board panels was studied. LÄS MER

  7. 5. Quasi-instantaneous and Long-term Deformations of High-Performance Concrete with Some Related Properties

    Författare :Bertil Persson; Avdelningen för Byggnadsmaterial; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Shrinkage; Relative humidity; Long-term; Hydration; High-Performance Concrete; Elastic modulus; Deformations; Creep; Concrete; Cement; Quasi-instantaneous; Strength; Building construction; Byggnadsteknik;

    Sammanfattning : This report outlines an experimental and numerical study on quasi-instantaneous and long-term deformations of High-Performance Concrete, HPC, with some related properties. For this purpose about two hundred small cylinders and about one thousand cubes of eight types of HPC were cast. The age at loading varied between 18h and 28 days. LÄS MER