Sökning: "shear strength"

Visar resultat 21 - 25 av 278 avhandlingar innehållade orden shear strength.

1. 21. Effect of shear cutting on metal fatigue

   Författare :David Gustafsson; Erik Olsson; Jörgen Kajberg; Pär Jonsén; Henrik Sieurin; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Punching; Trimming; Shear cutting; Fatigue; HCF; Residual stresses; Hållfasthetslära; Solid Mechanics;

   Sammanfattning : Lightweighting of automotive and heavy-duty vehicle components is an important task that does not need any further motivation or background. It can be read in a large part of the technical papers in the field. A common approach for finding lighter solutions is to increase the material grade while decreasing the material thickness. LÄS MER

3. 22. Shear walls for multi-storey timber buildings

   Författare :Johan Vessby; Hilmer Riberholt; Växjö universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; multi-storey structures; timber engineering; wind stabilization; shear walls; cross-laminated timber wall panels; fasteners; connections; sheathing; Building engineering; Byggnadsteknik; Byggteknik; Civil engineering;

   Sammanfattning : Wind loads acting on wooden building structures need to be dealt with adequately in order to ensure that neither the serviceability limit state nor the ultimate limit state is exceeded. For the structural designer of tall buildings, avoiding the possibly serious consequences of heavy wind loading while taking account at the same time of the effects of gravitation can be a real challenge. LÄS MER

4. 23. Adhesion strength of HVOF sprayed Inconel 718 coatings

   Författare :Christophe Lyphout; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Adhesion Strength; Residual Stress; Inconel 718; Thermal spray; Finite Element Method; HVOF; High Velocity Oxy-Fuel;

   Sammanfattning : Thermal spray technology in general is nowadays recognized as an industrial process, mature enough to apply coatings on different substrate materials that protect parts against wear, corrosion, heat, or combinations of these. The quality demands on coating homogeneity and adhesion strength are, nowhere more than in the automotive and aeronautic industries, continuously increasing. LÄS MER

5. 24. The modified Iosipescu shear test for orthotropic materials

   Författare :Niklas Melin; Jonas Neumeister; Gradin Per; KTH; []
   Nyckelord :composite; modified Iosipescu tet; shear test; strain field uniformity; TECHNOLOGY; TEKNIKVETENSKAP;

   Sammanfattning : AbstractThe Iosipescu shear test, also known as asymmetric four point bending of a V-notched beam,is frequently used for measuring in-plane shear properties of composites. The ASTM standard(ASTM D-5379-05) regulates how the test is to be performed. LÄS MER

7. 25. Explosions in urban environments: Modelling of gas explosions and risk of premature shear failure in reinforced concrete structures

   Författare :Fabio José Lozano Mendoza; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; blast strength; urban road environments; computational fluid dynamics; blast loading; Vapour cloud explosions; factorial design; premature shear failure; Monte Carlo method; model uncertainty;

   Sammanfattning : The risk for accidental gas explosions in urban environments has increased in Sweden in recent years. This is due to densification of existing urban centres and the rise of vehicles powered by alternative fuels. LÄS MER