Sökning: "separation of inclusions"
Visar resultat 1 - 5 av 16 avhandlingar innehållade orden separation of inclusions.
1. A Study on the Population and Chemical Development of Non-Metallic Inclusions in the Tool-Steel Making Process
Sammanfattning : The present work was to study the population and chemicalcharacterization of the inclusions at different steps of thetool steel making process based on industrial trialexperiments. The inclusion populations were found to increasewith ladle age (number of heats ladle being used) beforealuminium deoxidation and before casting. LÄS MER
2. Structure Evolution during Phase Separation and Gelation of Biopolymer Mixtures
Sammanfattning : This thesis focuses on the kinetics of phase separation and gelation in aqueous mixtures of gelatin and maltodextrin. The structure evolution of these mixtures at different length scales was recorded by confocal laser scanning microscopy (CLSM) and transmission electron microscopy (TEM). The microstructure was quantified by image analysis. LÄS MER
3. Formation of oxide-inclusions by ladle glaze and a preliminary examination on the possibility of inclusion seperation by bubble floatation
Sammanfattning : The present work was to study the role of ladle glaze as apotential supplier of inclusions to the steel melt during theladle refining process. In this study, the total number ofinclusions at the beginning and at the end of the ladletreatment process was found to be increasing with ladle age,which is the number of heats, the ladle being used. LÄS MER
4. A study of solid and liquid inclusion separation at the steel-slag interface
Sammanfattning : This thesis work aimed to provide a better knowledge of inclusion behavior at the steel-slag interface. All results are based on mathematical modeling of liquid and solid inclusion separation to the slag. The model descriptions of the inclusion transfer are based on the equation of motion at the system. LÄS MER
5. Three Dimensional Determinations of Inclusions in Ferroalloys and Steel Samples
Sammanfattning : As the requirements on material properties increase, there has been a demand on an additional knowledge on the effect of impurities in the ferroalloyson the steel cleanness. Thus, the number, morphology, size and composition of inclusions in sixdifferent ferroalloys (FeTi, FeNb, FeSi,SiMn, LC and HC FeCr) were investigatedin this study. LÄS MER