Sökning: "radiated emission"
Visar resultat 1 - 5 av 13 avhandlingar innehållade orden radiated emission.
1. On Performance of Digital Radio Receiver in Non-Gaussian Interference
Sammanfattning : Interference from electrical equipment can degrade a co-located digital radio receiver severely. To avoid this performance degradation it is necessary to have estimation methods to predict the influence from an interference environment on a radio receiver in advance. LÄS MER
2. Computation of EMC Properties of Slots and Printed Circuit Boards
Sammanfattning : This thesis deals with the numerical solution of electromagnetic compatibility (EMC) problems for electronic systems, such as radiated emission, susceptibility and crosstalk on printed circuit boards and transmission through slots. The analysis of printed circuit boards is done by using an electric field integral equation (EFIE) expressed in the frequency domain, which is solved by using the method of moments. LÄS MER
3. A new approach for considering the interference impact on digital radio systems from complex interference environments
Sammanfattning : Interference from electrical equipment can severely degrade aco-located digital radio receiver. To avoid such performance degradation, it isnecessary to have estimation methods to predict the influence of an interferenceenvironment on a radio receiver. LÄS MER
4. Conducted and Radiated Electromagnetic Interference in Modern Electrified Railways with Emphasis on Pantograph Arcing
Sammanfattning : Arcing from the pantograph, a commonly observed phenomenon, is knownto be a major source of wideband electromagnetic emission which is more pronounced during the winter. Experience within the railway industry has shown that this source of EMI and its characteristics need to be understood thoroughly for solving the associated EMI issues in the desired fashion. LÄS MER
5. High-frequency noise in power grids, neutral and protective earth
Sammanfattning : This licentiate thesis deals with the high-frequency distortion, 1 kHz and higher, introduced into the power grid by the numbers of power converters in use today. These devices can be a source of electromagnetic interference and equipment damage despite the fact that the equipment complies product-standards testing. LÄS MER