Sökning: "pyrometer"
Visar resultat 1 - 5 av 6 avhandlingar innehållade ordet pyrometer.
1. Characterization of White Layers induced by Hard Turning of AISI 52100 Steel
Sammanfattning : Hard turning is a machining process applied to metallic materials with hardness above 45 HRC. The process offers high production flexibility and sustainable manufacturing since it allows performing both rough and finishing machining of complex geometries in one single setup. LÄS MER
2. Spark Plasma Sintering Enhancing Grain Sliding, Deformation and Grain Size Control : Studies of the Systems Ti, Ti/TiB2, Na0.5 K0.5 NbO3, and Hydroxyapatite
Sammanfattning : The unique features of the Spark plasma sintering (SPS) were used to investigate the sintering and deformation behaviour of titanium and titanium–titanium diboride composites, and to control the sintering and grain growth of ferroelectric Na0.5K0.5NbO3 (NKN) and of hydroxyapatite (HAp). LÄS MER
3. Characterization of conversion zones in a reciprocating grate furnace firing wet woody biomass
Sammanfattning : Grate-firing systems are a common and popular combustion technology for burning biomass. However, combustion of biomass in these furnaces may emit a large amount of pollutants in the form of CO, CH4, PAH, NOx, and particles. LÄS MER
4. A study of surface temperature and heat flux estimations in heating processes by solving an Inverse Heat Conduction Problem
Sammanfattning : The topic of this thesis is estimation of the dynamic changes of the surface temperatureand heat flux during heating processes by using an inverse method. The local transient surface temperature and heat flux of a steel slab are calculated based on measurements in the interior of the slab. LÄS MER
5. Instrumentation and estimation for high temperature control
Sammanfattning : Within a variety of industrially relevant high temperature production processes such as welding, heat treatment and metal deposition, the quality of the manufactured component is largely affected by how well parameters can be controlled during processing. These parameters might be, in the case of metal deposition, power input, material feed, or a parameter which is common for all of the aforementioned processes: material temperature. LÄS MER