Sökning: "printability"

Visar resultat 1 - 5 av 14 avhandlingar innehållade ordet printability.

  1. 1. Printability and Ink-Coating Interactions in Inkjet Printing

    Detta är en avhandling från Fakulteten för teknik- och naturvetenskap

    Författare :Erik Svanholm; Karlstads universitet.; [2007]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TECHNOLOGY Chemical engineering; TEKNIKVETENSKAP Kemiteknik; Chemical Engineering; Kemiteknik; coating; inkjet; print quality; printability; pigment; silica; polyvinyl alcohol; colorant; ink absorption;

    Sammanfattning : Inkjet is a digital printing process where the ink is ejected directly onto a substrate from a jet device driven by an electronic signal. Most inkjet inks have a low viscosity and a low surface tension, which put high demands on the coating layer’s porosity and absorbency characteristics. LÄS MER

  2. 2. Measurement and prediction procedures for printability in flexography

    Detta är en avhandling från Stockholm : Numerisk analys och datalogi

    Författare :Laurent Girard Leloup; KTH.; [2002]
    Nyckelord :flexography; printability; objectivity; measurement; prediction; quality control;

    Sammanfattning : .... LÄS MER

  3. 3. Influence of Substrate Topography on Ink Distribution in Flexography

    Detta är en avhandling från Fakulteten för teknik- och naturvetenskap

    Författare :Gustavo Gil Barros; Karlstads universitet.; [2006]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TECHNOLOGY Chemical engineering; TEKNIKVETENSKAP Kemiteknik; Chemical Engineering; Kemiteknik; paperboard; topography; optical measurement; OptiTopo; flexography; flexo; print quality; printability; uncovered area; UCA; image analysis; frequency analysis; surface properties; paper properties; test equipment; measuring instrument;

    Sammanfattning : The printability of paper in flexography is largely dependent on the topographical characteristics of the substrate. Topography imaging instruments make it possible to obtain three-dimensional scans of paper surfaces that can be further used to calculate valuable quality parameters. LÄS MER

  4. 4. 3D Printing Wood Tissue

    Detta är en avhandling från ; Chalmers tekniska högskola; Gothenburg

    Författare :Kajsa Markstedt; [2018]
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hydrogel; Galactoglucomannan; Crosslinking; Biocomposite; 3D Printing; Wood Tissue; Xylan; Printability; Cellulose Nanofibrils;

    Sammanfattning : Biomass from forests provides society with energy, materials and chemicals, thus contributing to the circular bioeconomy. The majority of biomass is found in the wood tissue of trees. LÄS MER

  5. 5. Optical Topographical Characterisation for Flexographic Printability

    Detta är en avhandling från Karlstad : Karlstad University Studies

    Författare :Gustavo Gil Barros; [2004]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Chemical Engineering; Kemiteknik;

    Sammanfattning : The flexographic printability is largely dependent on the topographical characteristics of the substrate. OptiTopo is a recently developed optical imaging technique, which provides precise and fast topographic scans of both printed and unprinted paper surfaces. LÄS MER