Sökning: "post-processing growth"
Visar resultat 1 - 5 av 16 avhandlingar innehållade orden post-processing growth.
1. 3D-printing for Aerospace : Fatigue Behaviour of Additively Manufactured Titanium
Sammanfattning : Laser powder bed fusion (L-PBF) and electron beam powder bed fusion (E-PBF) are two of the most common additive manufacturing (AM) methods which both provide the engineer with a great freedom of design.This means that parts with light weight, multifunctional applications and improved performance could be achieved through innovative design solutions which have attracted a lot of interest from the aerospace industry. LÄS MER
2. Inactivation, Cell Injury and Growth of Microorganisms Exposed to Pulsed Electric Fields Using a Continuous Process
Sammanfattning : Pulsed electric fields (PEF) is a proven technology to inactivate microorganisms under non-thermal conditions. The PEF technology has a potential as a "quality friendly" alternative to traditional methods of food preservation. LÄS MER
3. Microstructure and mechanical properties of low-temperature hot isostatic pressed Ti-6Al-4V manufactured by electron beam melting
Sammanfattning : Ti-6Al-4V manufactured by electron beam melting Keywords: Additive manufacturing, high-temperature tensile properties, low cycle fatigue, neutron diffraction, fatigue crack growth ISBN: 978-91-89325-27-2 (Printed) 978-91-89325-26-5 (Electronic) Ti-6Al-4V is the most widely used α+β titanium alloy in aerospace engine applications due to its high specific strength. Typically, the alloy is manufactured as castings or forgings and then machined to final geometry. LÄS MER
4. A New Model for Room Acoustic Prediction and Auralization
Sammanfattning : The development of two room acoustic prediction models and auralization methods are described. The first prediction model is a combination of two well known algorithms with some extensions; the image source model and ray-tracing. LÄS MER
5. Defects in E-PBF Ti-6Al-4V and their Effect on Fatigue Behaviour : Characteristics, Distribution and Impact on Life
Sammanfattning : Layer by layer manufacturing (additive manufacturing, AM) of metals is emerging as an alternative to conventional subtractive manufacturing with the goal of enabling near net-shape production of complex part geometries with reduced material waste and shorter lead times. Recently this field has experienced rapid growth through industrial adaptation but has simultaneously encountered challenges. LÄS MER