Sökning: "pool boiling"
Visar resultat 1 - 5 av 22 avhandlingar innehållade orden pool boiling.
1. Pool Boiling on Structured Surfaces: Heat Transfer and Critical Heat Flux : Experiments and Mechanistic Modelling
Sammanfattning : In this thesis, pool boiling heat transfer was experimentally studied on structured surfaces with dielectric liquids (HFE-7200, NOVEC-649, FC-72), organic liquids (Acetone, Pentane) and deionized water.In the first step, nanoparticle coatings on copper surfaces were prepared by an electrophoretic deposition method, with Cu-Zn nanoparticles (100 nm) and Cu nanoparticles (150 nm). LÄS MER
2. Engineering nanomaterials with enhanced functionality
Sammanfattning : This thesis deals with the engineering of novel nanomaterials, particularly nanocomposites and nanostructured surfaces with enhanced functionalities. The study includes two parts; in the first part, an in situ sol-gel polymerization approach is used for the synthesis of polymer-inorganic hybrid material and its exceptional transparent UV-shielding effect has been investigated. LÄS MER
3. Flow boiling of ammonia and propane in mini channels
Sammanfattning : The environmental concerns in recent times have grown especially after signing Montreal protocol. In the last ten years, researchers have focussed mainly on understanding the boiling and condensation phenomena of HFC refrigerants in minichannels. LÄS MER
4. Seismic high-frequency content loads on structures and components within nuclear facilities
Sammanfattning : Sweden is generally considered to be a low seismicity area, but for structures within nuclear power facilities, the safety level demand with respect to seismic events are high and thus, these structures are required to be earthquake-resistant. The seismic hazard is here primarily considered to be associated with near-field earthquakes. LÄS MER
5. Steam condensation in a water pool and its effect on thermal stratification and mixing
Sammanfattning : The Pressure Suppression Pool (PSP) of a Boiling Water Reactor (BWR) is a large heat sink designed to limit the containment pressure by condensing steam released from the primary coolant system. The development of thermal stratification is a safety concern since it leads to higher containment pressures than in completely mixed conditions, and can affect the performance of systems such as the emergency core cooling and containment spray, which the use PSP as a source of water. LÄS MER