Sökning: "piecewise-linear modelling"

Visar resultat 1 - 5 av 8 avhandlingar innehållade orden piecewise-linear modelling.

  1. 1. Direction-dependent processes - Theory and application

    Författare :Fredrik Rosenqvist; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; realisation; parameter estimation; direction-dependent dynamic processes; electronic noses; pulp and paper applications; piecewise-linear modelling;

    Sammanfattning : In this thesis, direction-dependent processes are described as processes whose responses differ in shape, strength and speed, depending on whether the input signal or output signal increases or decreases. The way in which these dynamics arise is discussed for three different applications; these applications are a thermomechanical pulp refiner, in which the motor load response to the hydraulic pressure is direction dependent, a paper machine, in which the calliper control in the calender section is direction dependent, and an electronic nose, in which the response to substrate concentration is direction dependent. LÄS MER

  3. 2. Essays on nonlinear time series modelling och hypothesis testing

    Författare :Birgit Strikholm; Handelshögskolan i Stockholm; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES;

    Sammanfattning : There seems to be a common understanding nowadays that the economy is nonlinear. Economic theory suggests features that can not be incorporated into linear frameworks, and over the decades a solid body of empirical evidence of nonlinearities in economic time series has been gathered. LÄS MER

  4. 3. Dual mass flywheels in truck powertrains, Modelling, simulations and validation

    Författare :Lina Wramner; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; DMF; simulations; heavy-duty truck; resonances; driveline; dual mass flywheel; powertrain; torsional vibrations; friction;

    Sammanfattning : The heavy-duty vehicle manufacturers face large challenges when it comes to reducing CO2 emissions from vehicles. The on-going development of more efficient combustion engines leads to an increase in torsional vibrations. LÄS MER

  5. 4. Material Characterization for Modelling of Sheet Metal Deformation and Failure

    Författare :Stefan Marth; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hållfasthetslära; Solid Mechanics;

    Sammanfattning : Weight reduction is one possibility to reduce fuel consumption and emission of transportation vehicles. Sheet metals are often used in automotive and aerospace applications and therefore the weight reduction achieved by reducing the sheet metals thickness is an important contribution to weight reduction. LÄS MER

  7. 5. An Approach on Material Model Calibration for Modelling of Sheet Metal Deformation and Failure

    Författare :Stefan Marth; Hans-Åke Häggblad; Mats Oldenburg; Jörgen Kajberg; Odd Sture Hopperstad; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hållfasthetslära; Solid Mechanics;

    Sammanfattning : Sheet metals are often used in automotive and aerospace applications for safety-relevant components. Weight reduction is one possibility to reduce fuel consumption or increase the payload capacity and therewith reduce the carbondioxide emission of these trans-portation vehicles. LÄS MER