Sökning: "particle concentration probe"
Visar resultat 1 - 5 av 19 avhandlingar innehållade orden particle concentration probe.
1. Fluid Dynamics of the Transport Zone of Circulating Fluidized Beds - with Application to Boilers
Sammanfattning : The particle suspension flow structure in circulating fluidized beds (CFB) was studied with emphasis on the layer of downflowing particles at the wall. The main experiments were carried out in the furnace of the 12 MWth CFB boiler of 1.7x1.7 m cross-section, and in a two-dimensional CFB cold bed of 0. LÄS MER
2. Heat and Mass Transfer to a Single Particle in Fluidized Bed
Sammanfattning : Heat and mass transfer to/from a single active particle in bubbling and circulating fluidized beds have been studied with application to fluidized bed combustion. A method of calculation of the heat and mass transfer coefficients in a bubbling fluidized bed (BFB) has been developed. LÄS MER
3. Characterization of particulate matter from atmospheric fluidized bed biomass gasifiers
Sammanfattning : Through biomass gasification, biomass can be converted at high temperature to a product gas rich in carbon monoxide, hydrogen, and methane. After cleaning and upgrading, the product gas can be converted to biofuels such as hydrogen; methanol; dimethyl ether; and synthetic diesel, gasoline, and natural gas. LÄS MER
4. Benzene-char conversion and particle-vapor characterization in biomass gasification
Sammanfattning : Biomass is increasingly attracting attention as an alternative to fossil fuels. Gasification permits the thermochemical conversion of biomass into a product gas rich in carbon monoxide and hydrogen. The product gas can be further processed to generate heat, electricity, synthesis gas, chemicals, and biofuels. LÄS MER
5. Particles from biomass combustion -Characteristics and influence of additives
Sammanfattning : AbstractHigh particle concentration in the air is a health risk, and particles from domestic biomass combustion are a significant particle source. In larger boilers, particles are an important element in the build-up of deposits on heat transfer surfaces, causing increased operation and maintenance costs. LÄS MER