Sökning: "paint appearance"

Visar resultat 1 - 5 av 7 avhandlingar innehållade orden paint appearance.

1. 1. On Surface Topography of Steel Sheet for Car Bodies

   Författare :Magnus Jonasson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; paint appearance; forming; steel sheet; bearing area; 3D surface roughness; area parameters; ball filter; friction; surface topography;

   Sammanfattning : This thesis is a contribution to the scientific area of surface topography on sheet metal surfaces. The studies are restricted to exploring the influence of the steel sheet,s surface topography on forming properties and on appearance after painting. LÄS MER

3. 2. Inhibition of Aluminium Pigments for Waterborne Coatings

   Författare :Philip Karlsson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; hydrogen evolution; AFM; surfactant; aluminium pigment; polymer; silica stabilisation; water based; adsorption; inhibition; waterborne; printing ink; QCM-D; AAS; reflectometry; encapsulation; paint; metallic pigment; coating; XPS;

   Sammanfattning : Micrometer-sized aluminium flakes for use as pigments in waterborne coatings need protection, since the reaction between aluminium and water causes formation of aluminium hydroxide and hydrogen gas. The aluminium hydroxide destroys the metallic appearance of the pigment flakes and the evolution of hydrogen gas leads to a dangerous pressure build-up in the paint containers. LÄS MER

4. 3. Studies on the barrier properties of exterior wood coatings

   Författare :Jan Ekstedt; KTH; []
   Nyckelord :Coatings; surfactants; water absorption value; EN 927; paint; additives; moisture dynamics; absorption; desorption; artificial weathering; artificial exposure; computerized tomography; MRI.;

   Sammanfattning : Coatings for exterior wood have two basic functions. One isto give an aesthetically acceptable surface appearance andcolour. The other is to provide protection against wooddegradation by microbiological or physical attack. LÄS MER

5. 4. The Influence of Steel Sheet Surface-Topography on Friction in Stamping

   Författare :Anders Wihlborg; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Micro Plasto HydroDynamic Lubrication MPHDL ; EBT; ECD; EDT; WC index; SBT; surface topography; Micro Plasto HydroStatic Lubrication MPHSL ; tribology; steel sheets; Surface Indentation Test; bending under tension;

   Sammanfattning : Steel sheet is the prevalent material for car body panels. In the manufacturing of steel sheets a certain surface roughness is achieved from the ground or textured rolls used in the three final reduction steps. When manufacturing car body panels the sheets first are formed and then painted. LÄS MER

7. 5. Fatty acid methyl esters as reactive diluents in solvent-borne thermally cured coil-coatings

   Författare :Katarina Johansson; Mats Johansson; Mats Jonsson; KTH; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Fatty acids; Reactive diluents; Coatings; Thermal curing; Transesterification; Film properties; Polymer chemistry; Polymerkemi;

   Sammanfattning : This work describes how a fatty acid methyl ester (FAME) derived from a vegetable oil can be introduced as reactive diluent in a solvent-borne thermally cured coil-coating system. The evaluated reactive diluent, rape seed methyl ester (RME), has been evaluated both in a fully formulated clear coat system and via model studies. LÄS MER