Sökning: "nacl particles"
Visar resultat 21 - 25 av 26 avhandlingar innehållade orden nacl particles.
21. Road runoff quality in cold climates
Sammanfattning : The main objective of the doctoral thesis was to investigate the complex processes and influencing factors affecting snowmelt-induced runoff and snowmelt quality in a cold climate under wintry conditions compared to non- winter conditions in areas with a warmer climate. In order to improve the understanding and knowledge of road-runoff quantity, quality and pollutant transport, snowmelt and rainfall runoff were studied and characterized in the laboratory and in the field, respectively. LÄS MER
22. Interfacial colloidal particle films and their structure formation
Sammanfattning : Abstract toInterfacial colloidal particle films andtheir structure formation; a licentiate thesis, whichwill be presented by Sandra Rödner in Q2, 29 November 2002at 13.00.Colloidal particles can be made to organise themselves intoordered arrays. LÄS MER
23. Filtration of Microcrystalline and Microfibrillated Cellulose: The impact of ions and electric field
Sammanfattning : Dewatering plays an essential role in the processing of microcrystalline cellulose (MCC) and microfibrillated cellulose (MFC), as their commercial attractiveness in many applications is limited by the high water content of the products. Filtration is the most common mechanical dewatering technique, but the filtration of these materials results in filter cakes with high filtration resistance. LÄS MER
24. Nanotribology, Surface Interactions and Characterization : An AFM Study
Sammanfattning : When two surfaces achieve contact, then contact phenomena such as adhesion, friction and wear can occur, which are of great interest in many disciplines, including physics, physical chemistry, material chemistry, and life and health sciences. These phenomena are largely determined by the nature and magnitude of the surface forces such as van der Waals, capillary and hydration forces. LÄS MER
25. Polyelectrolyte Complexes : Their Characterization and use for Modification of Wood Fibre Surfaces
Sammanfattning : For economical reasons filler particles and less expensive fibre raw materials are more frequently used in papermaking. This influences the mechanical properties of the formed papers in a negative way and it is therefore necessary to add strength-enhancing agents to the papermaking furnish. LÄS MER