Sökning: "mould flux"
Visar resultat 1 - 5 av 11 avhandlingar innehållade orden mould flux.
1. Heat transfer phenomena and mould flux lubrication in continuous casting of steel
Sammanfattning : Overall thermal resistance of the mould flux was measured tomake clear the influence of the mould flux properties on theheat transfer behavior in continuous casting, especiallythermal conductivity and the formation of air gaps in thisstudy. From the investigation of the effect of the mouldsurface temperature and physical properties of the mould fluxon heat transfer through the flux film, following knowledge hasbeen obtained. LÄS MER
2. Densities and viscosities of slags : modeling and experimental investigations
Sammanfattning : The present dissertation describes part of the efforts directed towards the development of computational tools to support process modeling. This work is also a further development of the Thermoslag software developed in the Division of Materials Process Science, KTH. LÄS MER
3. Viscosities of some Slag systems containing Calcium Fluoride
Sammanfattning : .... LÄS MER
4. On some positive effects of swirling flow for the continuous cast mould billets
Sammanfattning : Continuous caster moulds are the last and most important stage in the steelmaking process, where inclusions can either be generated or removed. With increasing casting speed using conventional immersion nozzles critical problems, such as unstable bulk mould flow have been noticed. LÄS MER
5. Influence of Mould Flux Properties on Early Solidification in Continuous Casting
Sammanfattning : .... LÄS MER