Sökning: "metal matrix composite"
Visar resultat 21 - 25 av 38 avhandlingar innehållade orden metal matrix composite.
21. Manufacture of long-fibre reinforced ceramics by reaction bonding
Sammanfattning : For several decades ceramic matrix composites has been of interest to be used as hot parts in certain high-performance gas turbine aero engines. In general, ceramic materials resist higher temperatures than superalloys. LÄS MER
22. Modelling and simulation of plastic deformation on small scales : interface conditions and size effects of thin films
Sammanfattning : Contrary to elastic deformation, plastic deformation of crystalline materials, such as metals, is size-dependent. Most commonly, this phenomenon is present but unnoticed, such as the effect of microstructural length scales. LÄS MER
23. Polyethylene – metal oxide particle nanocomposites for future HVDC cable insulation : From interface tailoring to designed performance
Sammanfattning : Low-density polyethylene (LDPE) nanocomposites containing metal oxide nanoparticles are considered as promising candidates for insulating materials in future high-voltage direct-current (HVDC) cables. The significant improvement in dielectric properties compared with unfilled polymer is attributed to the large and active interface between the nanoparticles and the polymer. LÄS MER
24. Exploration of Metal Composites and Carbon Nanotubes for Thermal Interfaces
Sammanfattning : Modern microelectronics are perpetually pushing against limitations caused by inadequate heat dissipation. One of the critical bottlenecks is at the interfaces between different materials and components. LÄS MER
25. 3D printing of Green Water Purification Filters : Design towards Sustainable and Scalable Biocomposite Materials
Sammanfattning : The globally escalating water pollution and water scarcity necessitates the development of efficient and sustainable water treatment technologies. This thesis investigates the feasibility of utilizing renewable and waste materials in the form of green composites for the fabrication of water purification filters via Fused Deposition Modelling (FDM). LÄS MER