Sökning: "mechanical analysis"

Visar resultat 6 - 10 av 2437 avhandlingar innehållade orden mechanical analysis.

1. 6. Meso-Mechanical Modeling and Analysis of Adhesive Layers

   Författare :Kent Salomonsson; Ulf Stigh; Per Ståhle; Högskolan i Skövde; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Adhesive layer; Meso-mechanical; Representative Volume Element; Large curvatures; Interphase elements; Evolution algorithm; Engineering mechanics; Teknisk mekanik; Technology; Teknik;

   Sammanfattning : This thesis is concerned with the modeling, simulation and analysis of adhesive layers. By use of an in situ scanning electron microscopy study it is found that the adhesive studied in the present thesis has a very complex structure with two different compounds, a mineral and an epoxy/thermoplastic blend. LÄS MER

3. 7. Mechanics of Cross-Laminated Timber

   Författare :Dietrich Buck; Olle Hagman; Dick Sandberg; Mats Ekevad; Mikael Sjödahl; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CLT assembly; CLT manufacture; Crosslam; DIC analysis; Digital speckle photography; Full-field mechanics; Laminated wood product; Mass timber engineering; Non-contact measurement; Non-destructive; Optical measurement; Panel configuration; Strain localization; X-lam; Alternativ byggmetod; Bildkorrelation; Hållbart byggande; KL- trä; Korslimmat trä; Skjuvtöjning; Massivträ; Träkonstruktion; Träteknik; Wood Science and Engineering;

   Sammanfattning : Increasing awareness of sustainable building materials has led to interest in enhancing the structural performance of engineered wood products. Wood is a sustainable, renewable material, and the increasing use of wood in construction contributes to its sustainability. LÄS MER

4. 8. Modal Analysis of Supersonic Flow Separation in Nozzles

   Författare :Ragnar Larusson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Separated Nozzle Flow; Dynamic Mode Decomposition; Hybrid RANSLES; CFD; Modal Analysis; Arnoldi;

   Sammanfattning : Operating a convergent-divergent nozzle under overexpanded conditions can lead to supersonic flow separation in the divergent section of the nozzle. In this case, an attached oblique shock wave forms at the separation base. LÄS MER

5. 9. On Contact Mechanisms and Mechanical Transmission Performance

   Författare :Lars Maclennan; Maskinelement; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; vacuum technology; vibration and acoustic engineering; Maskinteknik; hydraulik; vakuumteknik; vibrationer; akustik; hydraulics; Mechanical engineering; artificial neural network; experimental study; disc brake; dynamic analysis; shaft; Spur gear;

   Sammanfattning : This thesis consists of four papers, which treat the modelling of a spur gear set and a disc brake, and the interaction between the machine elements. Features of the performance are studied in relation to the initial stated assumptions. LÄS MER

7. 10. Fundamentals of a Methodology for Predictive Design Analysis

   Författare :Martin Eriksson; Innovation; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Predictive design analysis; Generic design analysis process model; Confidence appraisal activities; Computer-based design analysis; Engineering design; Integration;

   Sammanfattning : The rapid development of computer-based design analysis tools and methods such as the finite element method (FEM) within computational structural mechanics (CSM), computational fluid dynamics (CFD), and multi-body systems (MBS) during recent decades has fundamentally changed the way in which products are designed and developed. Among the many advantages observed in industrial practice, one can mention improved understanding of product properties and behavior, the possibility to optimize critical design parameters and to optimize parts as well as the entire product at a system level, the possibility to explore a design space during the synthesis activity, and a decrease of the need for physical testing and thus of the number of physical prototypes needed. LÄS MER