Sökning: "mechanical alloying"

Visar resultat 21 - 25 av 114 avhandlingar innehållade orden mechanical alloying.

  1. 21. Welds in the lean duplex stainless steel LDX 2101 : effect of microstructure and weld oxides on corrosion properties

    Författare :Elin M. Westin; John Ågren; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Duplex stainless steel; welding; weld metal; HAZ; nitrogen; manganese; austenite formation; phase balance; precipitates; pitting resistance; heat input; solidification; element loss; evaporation; deposition; weld oxides; discoloration; mechanical properties; thermo-mechanical simulation; Geeble; GTA; laser; LOM; SEM; EDS; TEM; Leco; EPMA; ferroxyl test; XPS; post weld cleaning; pickling; Materials science; Teknisk materialvetenskap;

    Sammanfattning : Duplex stainless steels are a very attractive alternative to austenitic grades due to their higher strength and good corrosion performance. The austenitic grades can often be welded autogenously, while the duplex grades normally require addition of filler metal. LÄS MER

  3. 22. SmCo for polymer bonded magnets : Corrosion, silanization, rheological, mechanical and magnetic properties

    Författare :Muhammad Irfan Qadeer; Steven Savage; Mikael Hedenqvist; Uta Klement; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Organofunctional alkoxysilanes; High temperature oxidation; Rare-earth magnetic alloys; SmCo; Isothermal; Non-isothermal; Microstructure; Magnetic properties;

    Sammanfattning : This thesis presents the study of organofunctional alkoxysilane coatings to prevent high temperature oxidation of Sm-Co powders. Sm-Co are important permanent magnetic alloys, owing to their high Curie temperature and large values of magnetocrystalline anisotropy. LÄS MER

  4. 23. Thermal Stability and Mechanical Properties of Bainitic Steel

    Författare :Adam Ståhlkrantz; Annika Borgenstam; Peter Hedström; Niklas Sarius; Joacim Hagström; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Bainite; Austempering; Low alloyed steel; Tempering; Variant pairing; Material characterization; Metallurgical process science; Metallurgisk processvetenskap; Materials Science and Engineering; Teknisk materialvetenskap;

    Sammanfattning : For material design it is important to understand and establish the relations between the processing of the steel, the resulting microstructure and how that correlate to the properties of the steel. The main focus of this thesis has been to increase this knowledge for low alloy bainitic steels with medium to high carbon content. LÄS MER

  5. 24. Mechanical and thermal stability of hard nitride coatings

    Författare :Yu-Hsiang Chen; Magnus Odén; Lina Rogström; Tomasz Liskiewicz; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES;

    Sammanfattning : Hard coating’s thermal stability is essential due to the high temperature environment of high-speed cutting applications, while the phase and microstructure evolution induced by exposing the coating to high temperature affects the mechanical properties. In this thesis, the mechanical stability of arc-evaporated, hard, transition metal nitride coatings annealed at high temperature is analyzed and related to the phase and microstructure evolution. LÄS MER

  7. 25. Temperature dependent mechanical properties of as-cast steels : Experimental and theoretical studies

    Författare :Zhihua Dong; Levente Vitos; Imre Bakonyi; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : The temperature-dependent mechanical properties of steels are important to avoid processing defects, to understand and to improve the high-temperature performance. At the same time, having access to thermal properties gives us opportunity to assess the first-principles theoretical predictions at elevated temperatures. LÄS MER