Sökning: "material testing"

Visar resultat 1 - 5 av 693 avhandlingar innehållade orden material testing.

  1. 1. Development of Nanostructured Tungsten Based Composites for Energy Applications

    Författare :Mazher Ahmed Yar; Mamoun Muhammed; Per-Olov Käll; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tungsten; Nano-tungsten; ODS tungsten; W-La2O3; W-Y2O3; SPS; Plasma-facing materials; Armour material; fusion material;

    Sammanfattning : Tungsten (W) based materials can be used in fusion reactors due to several advantages. Different fabrication routes can be applied to develop tungsten materials with intended microstructure and properties for specific application including nanostructured grades. LÄS MER

  3. 2. Shear Fracture and Delamination in Packaging Materials : A study of Experimental Methods and Simulation Techniques

    Författare :Md. Shafiqul Islam; Sharon Kao-Walter; Christian Johansson; Johan Tryding; Blekinge Institute of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Package opening; Shear test specimen; Stress intensity factor; Finite Element simulation; Scanning electron microscopy; Polymers; Interlaminar shear delamination;

    Sammanfattning : Packages are the means of preservation, distribution and convenience of use for food, medicine and other consumer products. Package opening is becoming complicated in many cases because of cutting cost in design and production of opening techniques. LÄS MER

  4. 3. The influence of microstructure on mechanical and tribological properties of lamellar and compacted irons in engine applications

    Författare :Rohollah Ghasemi; Anders E. W. Jarfors; Ricardo César Dommarco; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cast iron; Si solution-strengthened CGI; microstructure; mechanical properties; modelling and simulation; tribology; abrasive wear; scratch testing;

    Sammanfattning : Lamellar graphite iron (LGI) is commonly used in diesel engine applications such as piston rings–cylinder liner where an excellent combination of physical and tribological properties is essential to avoid scuffing and bore polishing issues. The excellent tribological behaviour of LGI alloys is related to the graphite lamellas, which act as solid lubricant agents by feeding onto the tribosurfaces under sliding conditions. LÄS MER

  5. 4. On the deformation behavior and cracking of ductile iron; effect of microstructure

    Författare :Keivan Amiri Kasvayee; Anders E.W. Jarfors; Jens Bergström; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Spherical graphite iron; component casting; high silicon ductile iron; digital image correlation DIC ; in-situ tensile testing; in-situ cyclic testing; DIC pattern generation; pit etching; micro-scale deformation; micro-crack; finite element analysis FEA ; focused ion beam FIB milling; segjärn; komponentgjutning; högkisellegerat segjärn; digital image correlation DIC ; insitu dragprovning; in-situ cyklisk provning; DIC-mönstergenerering; grop-etsning; mikroskalig deformation; mikrosprickor; finite element analys FEA ; fokuserad jonstråle FIB avverkning;

    Sammanfattning : This thesis focuses on the effect of microstructural variation on the mechanical properties and deformation behavior of ductile iron. To research and determine these effects, two grades of ductile iron, (i) GJS-500-7 and (ii) high silicon GJS-500-14, were cast in a geometry containing several plates with different section thicknesses in order to produce microstructural variation. LÄS MER

  7. 5. The effect of microstructural features, defects and surface quality on the fatigue performance in Al-Si-Mg Cast alloys

    Författare :Toni Bogdanoff; Ehsan Ghassemali; Salem Seifeddine; Anders E.W. Jarfors; Ru Peng; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Aluminum-Silicon alloys; defects; material characterization; fatigue performance; digital image correlation;

    Sammanfattning : Global warming is driving industry to manufacture lighter components to reduce carbon dioxide (CO2) emissions. Promising candidates for achieving this are aluminium-silicon (Al-Si) cast alloys, which offer a high weight-to-strength ratio, excellent corrosion resistance, and good castability. LÄS MER