Sökning: "material composites"

Visar resultat 1 - 5 av 377 avhandlingar innehållade orden material composites.

  1. 1. Development of Nanostructured Tungsten Based Composites for Energy Applications

    Författare :Mazher Ahmed Yar; Mamoun Muhammed; Per-Olov Käll; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tungsten; Nano-tungsten; ODS tungsten; W-La2O3; W-Y2O3; SPS; Plasma-facing materials; Armour material; fusion material;

    Sammanfattning : Tungsten (W) based materials can be used in fusion reactors due to several advantages. Different fabrication routes can be applied to develop tungsten materials with intended microstructure and properties for specific application including nanostructured grades. LÄS MER

  3. 2. Cellulose–Assisted Dispersion of Carbon Nanotubes : From Colloids to Composites

    Författare :Alireza Hajian; Lars Berglund; Milo Shaffer; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Nanocelluloses; Carbon nanotubes; Composites; Colloids; Fiber- och polymervetenskap; Fibre and Polymer Science;

    Sammanfattning : It is a challenge to disperse nanoparticles to obtain a nanostructured composite. This thesis aims at providing a new route to fabricate carbon nanotube (CNT) composites and suggests mechanisms for nanocellulose–CNT interactions. This route is based on unmodified CNT dispersed in water with the help of nanocellulose. LÄS MER

  4. 3. Variation Simulation Customized for Composites by Including FEM Simulations of Orthotropic Lamina

    Författare :Cornelia Jareteg; Göteborgs universitet; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Geometry assurance; FEM; Composites; Shell model; Process variation; Method of Influence Coefficients; Monte Carlo; Orthotropic material; Manufacturing; Tolerance analysis; Variation simulation; Spring-in; Tolerance analysis;

    Sammanfattning : The use of composite materials is increasing in many fields of production. Composite manufacturing, as well as other fields of production, suffers from uncertainties resulting in products that deviate from the specification. Geometry assurance is a common procedure used to keep the variations in product assemblies under control. LÄS MER

  5. 4. Liquid phase sintering of W-Ni-Fe composites : liquid penetration, agglomerate separation and tungsten particle growth

    Författare :Anders Eliasson; Hasse Fredriksson; Thomas Gomez-Acebo; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Liquid phase sintering; heavy metal; particle composites; tungsten; penetration; agglomerate separation; particle interaction; parabolic flight; sounding rockets; microgravity; Kirkendall effect; Metallurgical process engineering; Metallurgisk processteknik;

    Sammanfattning : The initial stage of liquid phase sintering, involving liquid penetration, agglomerate separation, particle spreading and growth has been investigated in experiments using tungsten heavy alloys. The particle composites used were produced by hot isostatic pressing (HIP) of pure powder mixtures of W-Ni-Fe-(Co). LÄS MER

  7. 5. Simultaneous Topology and Material Optimization of Composite Structures under Uncertainty

    Författare :Dženan Hozić; Carl-Johan Thore; François-Xavier Irisarri; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Structural Optimization; Composite Structures; Topology Optimization; Multi-material Optimization; Material Uncertainty; Robust Optimization; Composite Structure Optimization; Design Optimization; Composite Material;

    Sammanfattning : Composite materials are known to have superior stiffness and strength properties per unit weight compared to metallic materials. These properties and the ability to tailor the mechanical properties of composites is the main motivation for choosing composite materials for structural components. LÄS MER