Sökning: "lumped-element"

Visar resultat 1 - 5 av 9 avhandlingar innehållade ordet lumped-element.

  1. 1. Integrated Lumped Element and Ferroelectrically Tunable Microwave Components

    Författare :Dan Kuylenstierna; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; lumped; Passive element; metamaterial; periodic structure;

    Sammanfattning : This thesis treats the development of passive circuits for increased integrationlevel in microwave front-ends. The subject is approached from twodifferent directions. On the one hand, emerging materials for microwaveintegrated circuits are studied. On the other hand, novel circuit topologiesare synthesized. LÄS MER

  2. 2. Three-wave mixing in Josephson travelling-wave parametric amplifiers

    Författare :Hampus Renberg Nilsson; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; three-wave mixing; lumped-element; four-wave mixing; SNAIL; Josephson junction; travelling-wave parametric amplifier; parametric amplifier; parametric amplification; resonant phase matching.; rf-SQUID;

    Sammanfattning : This work explores possibilities of building a wide-band, quantum-limited low-noise amplifier by means of three-wave mixing (3WM) in different kinds of Josephson travelling-wave parametric amplifiers (TWPAs). We extend the theory of the continuous three-mode model to include any number of up-converted modes in the small frequency limit where the frequency dispersion is close to linear. LÄS MER

  3. 3. A lumped element transformer model including core losses and winding impedances

    Författare :David Ribbenfjärd; Göran Engdahl; Arvid Broddefalk; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; power transformer; hysteresis; dynamic hysteresis; eddy currents; excess eddy currents; leakage flux; winding model; core model; magnetic measurements; magnetic materials; Electrical engineering; Elektroteknik;

    Sammanfattning : In order to design a power transformer it is important to understand its internal electromagnetic behaviour. That can be obtained by measurements on physical transformers, analytical expressions and computer simulations. LÄS MER

  4. 4. System-in-a-Package on Low-Cost Liquid Crystal Polymer Substrate

    Författare :Gang Zou; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; FDTD; integrated passive components; ACA; liquid crystal polymer; FEM; flip-chip; RF; anisotropic conductive adhesive; system-in-a-package; system-on-a-package;

    Sammanfattning : System-in-a-Package (SiP) is one of the most advanced approaches to meet the requirements for future high-density electronics packaging. In this thesis, a 3D system-in-a-package concept with embedded active and passive components is proposed, where a liquid crystal polymer (LCP) was used as the base substrate. LÄS MER

  5. 5. THz Vector Beam Measurement System for APEX Instrument SHeFI and Microwave Cryogenic Low Noise Amplifier Design

    Författare :Olle Nyström; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; vector measurements; mm- and submm-wave optics; LNA; radio astronomy; cryogenic amplifier; APEX; InP HEMT; Gaussian beam;

    Sammanfattning : This licentiate thesis describes results of the author’s work on development of THz vector beam measurement system and microwave cryogenic low-noise amplifier.The first part, and the main focus, of the thesis covers the vector beam measurement system for frequency range 210-500 GHz developed to characterize/verify the cold opticsof the APEX instrument SHeFI. LÄS MER