Sökning: "low speed machines"

Visar resultat 1 - 5 av 36 avhandlingar innehållade orden low speed machines.

  1. 1. Measurements and Modelling of Low-Frequency Disturbances in Induction Machines

    Författare :Torbjörn Thiringer; Chalmers University of Technology; []
    Nyckelord :;

    Sammanfattning : The thesis deals with the dynamic response of the induction machine to low-frequency perturbations in the shaft torque, supply voltage and supply frequency. Also the response of a two-machine group connected to a weak grid is investigated. LÄS MER

  2. 2. Permanent-Magnet Synchronous Machines with Non-Overlapping Concentrated Windings for Low-Speed Direct-Drive Applications

    Författare :Florence Meier; Juliette Soulard; Zi-Qiang Zhu; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; electronic engineering; electrical engineering; Electrical engineering; electronics and photonics; Elektroteknik; elektronik och fotonik;

    Sammanfattning :  Many geared electric drives can benefit from removing the gearbox and driving directly the load at low speed using a permanent-magnet synchronous machine (PMSM). PMSMs with non-overlapping concentrated windings are particularly attractive in low-speed direct drives since they allow, among other advantages, a high number of poles with a limited number of slots. LÄS MER

  3. 3. Induction Machine Speed Estimation - Observations on Observers

    Författare :Bo Peterson; Industriell elektroteknik och automation; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; control engineering; robotics; Automation; Elektronik och elektroteknik; Electronics and Electrical technology; estimation; sensorless control; observer; induction machine; Automatiska system; robotteknik; reglerteknik;

    Sammanfattning : This work focuses on observers estimating flux linkage and speed for induction machines, mainly in the low speed region. With speed estimation, sensorless control is possible, meaning that the speed of induction machines without mechanical speed sensors can be controlled. LÄS MER

  4. 4. Suspension design for off-road construction machines

    Författare :Adam Rehnberg; Lars Drugge; Annika Stensson Trigell; David Crolla; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; construction machine; engineering vehicle; earth mover; wheel loader; vehicle dynamics; vehicle engineering; whole body vibrations; off-road vehicle; anläggningsmaskin; entreprenadmaskin; hjullastare; fordonsdynamik; fordonsteknik; helkroppsvibrationer; terrängfordon; Vehicle engineering; Farkostteknik;

    Sammanfattning : Construction machines, also referred to as engineering vehicles or earth movers, are used in a variety of tasks related to infrastructure development and material handling. While modern construction machines represent a high level of sophistication in several areas, their suspension systems are generally rudimentary or even nonexistent. LÄS MER

  5. 5. On analytical modeling and design of a novel transverse flux generator for offshore wind turbines

    Författare :Dmitry Svechkarenko; Chandur Sadarangani; Waqas Arshad; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Transverse flux machines; permanent magnet machines; direct-driven gen- erator; offshore wind turbine; renewable energy; global warming; Electrical engineering; Elektroteknik;

    Sammanfattning : The object of this thesis is to develop a cost effective direct-driven wind generator suited for offshore wind turbines. As the generator price is a complicated function dependent on many parameters, the emphasis is mainly put on reduction of the weight of active materials, such as copper, laminated steel, permanent magnets, and electrical insulation. LÄS MER