Sökning: "low modulus"
Visar resultat 11 - 15 av 183 avhandlingar innehållade orden low modulus.
11. The influence of graphite morphology on the elastic behaviour of cast irons
Sammanfattning : The morphology of the graphite phase largely controls the resulting properties of different grades of cast iron. In flake graphite cast irons, the mechanical properties are low while the thermal conductivity is high. In contrast, with spheroidal graphite cast irons, the mechanical properties are high while the thermal conductivity is low. LÄS MER
12. Influences of the Graphite Phase on Elastic and Plastic Deformation Behaviour of Cast Irons
Sammanfattning : The amount and morphology of the graphite phase largely controls the resulting properties of cast iron. For instance, in flake graphite cast irons the mechanical properties are low while the thermal conductivity is high. LÄS MER
13. Influence of waxes on bitumen and asphalt concrete mixture performance
Sammanfattning : This doctoral thesis consists of a literature review, presented in two papers, and another six papers describing experimental studies of the influence of different kinds of wax and polyphosporic acid on bitumen and asphalt concrete mixture properties. The literature review should give an extensive description of the field of knowledge concerning wax in bitumen. LÄS MER
14. The Physicochemical and Sensory Properties of Fruit and Vegetable Fibre Suspensions - The Effect of Fibre Processing and its Addition to Low-Fat Sausages
Sammanfattning : Due to the health effects of dietary fibre, as well as its water-holding capacity (WHC), food products are commonly fortified with fibre-rich sources. However, to be able to design food products with specific textural properties that also appeal to the consumer, it is important to understand and to characterise the physicochemical and chemical properties of the fibre. LÄS MER
15. Design of Microstructures in Thermal Barrier Coatings : A Modelling Approach
Sammanfattning : Plasma sprayed Thermal Barrier Coating systems (TBCs) are commonly used for thermal protection of components in modern gas turbine application such as power generation, marine and aero engines. The material that is most commonly used in these applications is Yttria Stabilized Zirconia (YSZ) because of this ceramic’s favourable properties, such as low thermal conductivity, phase stability to high temperature, and good erosion resistance. LÄS MER