Sökning: "load transfer"

Visar resultat 1 - 5 av 193 avhandlingar innehållade orden load transfer.

  1. 1. Dynamic Power System Load -Estimation of Parameters from Operational Data

    Författare :Ines Romero; Industriell elektroteknik och automation; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; control engineering; robotics; Automation; large disturbances; Load modeling; normal operation; voltage stability; dynamic load models; modeling and identification; normalization in reactive load models; Elektronik och elektroteknik; Electronics and Electrical technology; Automatiska system; robotteknik; reglerteknik; Electrical engineering; Elektroteknik;

    Sammanfattning : The significance of load modeling for voltage stability studies has been emphasized by several disturbances, which have taken place in the past years. They have shown that the loads in combination with other dynamics are among the main contributors of prolonged low voltage conditions, voltage instability and collapse in the power system. LÄS MER

  3. 2. Concrete pavements’ repair techniques and numerical assessment of dowel bar load transfer efficiency

    Författare :Saima Yaqoob; Johan Silfwerbrand; Larissa Strömberg; Anne Beeldens; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Concrete pavements; Rapid repair; Precast slabs; Dowel bar; Load transfer efficiency; Betongbyggnad; Concrete Structures;

    Sammanfattning : Concrete pavements are a suitable alternative for high-traffic volume roads, concentrated loads and roads exposed to severe weather conditions. In Sweden, among other reasons, the scarcity of concrete pavements is attributed to the need for more national knowledge and expertise in the field. LÄS MER

  4. 3. Dynamic Load Models for Power Systems - Estimation of Time-Varying Parameters During Normal Operation

    Författare :Ines Romero; Industriell elektroteknik och automation; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; voltage stability; Load modeling; modeling and identification; dynamic load models; normalization in reactive load models;

    Sammanfattning : Economic and environmental concerns will slow down the expansion of the transmission system in many countries. The addition of new transmission lines will be few and far between. The de-regulation of the power supply will introduce new power flow patterns on the bulk transmission systems. LÄS MER

  5. 4. Reduction of heat transfer and heat load in internal combustion engines

    Författare :Joop Somhorst; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; efficiency; TBC; thermal barrier coating; surface roughness; engine; heat transfer; emissions; alumina; zirconia;

    Sammanfattning : Thermal insulation of the combustion chamber in an engine has great potential to reduce fuel consumption and CO2 emissions. Research on thermal barrier coatings (TBC) has been performed since the early eighties to address this potential. LÄS MER

  7. 5. Workpiece steels protecting cutting tools from wear : A study of the effects of alloying elements on material transfer and coating damage mechanisms

    Författare :Toshiharu Aiso; Staffan Jacobson; Urban Wiklund; Staffan Söderberg; Uppsala universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Metal cutting; Steel; Cutting tools; Transfer; Coating; Sliding; Teknisk fysik med inriktning mot tribomaterial; Engineering Science with specialization in Tribo Materials;

    Sammanfattning : The vision of this thesis is to improve the machinability of workpiece steels. Workpiece material frequently transfers to the cutting tools during machining, and the transfer layers then forming on the tools may give both good and bad effects on machining performance and tool life. LÄS MER