Sökning: "laser metal deposition"

Visar resultat 1 - 5 av 47 avhandlingar innehållade orden laser metal deposition.

  1. 1. Phenomena in material addition to laser generated melt pools

    Författare :Himani Siva Prasad; Frank Brueckner; Alexander Kaplan; Sebastian Piegert; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; laser metal deposition; additive manufacturing; laser welding; multi-material; high speed imaging; powder incorporation; off-axis wire feed; streak imaging; laser cladding; absorptivity; Produktionsutveckling; Manufacturing Systems Engineering;

    Sammanfattning : .... LÄS MER

  3. 2. Additive Manufacturing using Alloy 718 Powder : Influence of Laser Metal Deposition Process Parameters on Microstructural Characteristics

    Författare :Andreas Segerstark; Joel Andersson; Lars-Erik Svensson; Robert Pedersen; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Laser metal deposition; powder; superalloy; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : Additive manufacturing (AM) is a general name used for production methodswhich have the capabilities of producing components directly from 3D computeraided design (CAD) data by adding material layer-by-layer until a final component is achieved. Included here are powder bed technologies, laminated object manufacturing and deposition technologies. LÄS MER

  4. 3. Welds in the lean duplex stainless steel LDX 2101 : effect of microstructure and weld oxides on corrosion properties

    Författare :Elin M. Westin; John Ågren; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Duplex stainless steel; welding; weld metal; HAZ; nitrogen; manganese; austenite formation; phase balance; precipitates; pitting resistance; heat input; solidification; element loss; evaporation; deposition; weld oxides; discoloration; mechanical properties; thermo-mechanical simulation; Geeble; GTA; laser; LOM; SEM; EDS; TEM; Leco; EPMA; ferroxyl test; XPS; post weld cleaning; pickling; Materials science; Teknisk materialvetenskap;

    Sammanfattning : Duplex stainless steels are a very attractive alternative to austenitic grades due to their higher strength and good corrosion performance. The austenitic grades can often be welded autogenously, while the duplex grades normally require addition of filler metal. LÄS MER

  5. 4. Laser Metal Deposition using Alloy 718 Powder : Influence of Process Parameters on Material Characteristics

    Författare :Andreas Segerstark; Joel Andersson; Lars-Erik Svensson; Boian Alexandrov; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Laser metal deposition; Powder; Superalloy; Material characterization; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : Additive manufacturing (AM) is a general name used for manufacturing methods which have the capabilities of producing components directly from 3D computeraided design (CAD) data by adding material layer-by-layer until a final componentis achieved. Included here are powder bed technologies, laminated object manufacturing and deposition technologies. LÄS MER

  7. 5. Towards full Automation of Robotized Laser Metal-wire Deposition

    Författare :Almir Heralic; Bengt Lennartson; Anna-Karin Christiansson; Giorgos Nikoleris; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser metal wire deposition; process control; process development; optical sensors; robotic weld equipment; Manufacturing engineering; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : Metal wire deposition by means of robotized laser welding offers great saving potentials, i.e. reduced costs and reduced lead times, in many different applications, such as fabrication of complex components, repair or modification of high-value components, rapid prototyping and low volume production, especially if the process can be automated. LÄS MER