Sökning: "k-ε realizable model"
Visar resultat 1 - 5 av 7 avhandlingar innehållade orden k-ε realizable model.
1. Turbine Outlet Guide Vane Flows
Sammanfattning : New design goals on modern jet engines often leads to more highly loaded turbines with fewer stages in order to save weight and cost. This gives higher swirl angles into the outlet guide vane (OGV), implying a more difficult aerodynamic design. LÄS MER
2. A Ventilation Strategy Based on Confluent Jets : An Experimental and Numerical Study
Sammanfattning : This study presents air distribution systems that are based on confluent jets; this system can be of interest for the establishment of indoor environments, to fulfill the goals of indoor climate and energy-efficient usage. The main objective of this study is to provide deeper understanding of the flow field development of a supply device that is designed based on wall confluent jets and to investigate the ventilation performance by experimental and numerical methods. LÄS MER
3. Some Aspects of Improving Initial Filling Conditions and Steel Cleanliness by Flow Pattern Control Using a Swirling Flow in the Uphill Teeming Process
Sammanfattning : The flow pattern has widely been recognized to have an impact on the exogenous non-metallic inclusion generation in the gating system and mold flux entrapment in the uphill teeming process. Thus, a well-controlled flow pattern during the teeming process can improve the quality of ingots and further increase the yield during steel production. LÄS MER
4. Modeling of Initial Mold Filling in Uphill Teeming Process Considering a Trumpet
Sammanfattning : The flow pattern in the uphill teeming process has been found to be closely related to the quality of ingots and further to affect the yield of ingot production, which is crucial for the steel making process. The formation of non-metallic inclusion and entrapment of mold flux has been considered to be affected by the flow pattern in the gating system and molds by many previous researchers. LÄS MER
5. A study of flow fields during filling of a sampler
Sammanfattning : More and more attention has been paid to decreasing the number and size of non-metallic inclusions existing in the final products recently in steel industries. Therefore, more efforts have been made to monitor the inclusions' size distributions during the metallurgy process, especially at the secondary steelmaking period. LÄS MER