Sökning: "joint angles"
Visar resultat 1 - 5 av 35 avhandlingar innehållade orden joint angles.
1. Wrist and thumb joint postures and motions: Measurements using electrogoniometry and EMG
Sammanfattning : Correct measurements of the joints’ extreme postures, velocity and repetitiveness are important for studies of the origin of musculoskeletal disorders. Posture measurements of wrist and thumb joints may also provide insights into input device designs that may reduce effort and/or facilitate productivity. LÄS MER
2. Orthopaedic measurements with computed radiography. Methodological development, accuracy, and radiation dose with special reference to the weight-bearing lower extremity and the dislocating patella
Sammanfattning : The overall aim of this study was to develop and evaluate a measurement system for computed radiography (CR) and Picture Archiving and Communication Systems (PACS), permitting measurements of long distances and angles in and between related images. The developed measurement system, which was based on the QUESTOR Precision Radiography (QPR) system, was applied to the weight-bearing knee with special reference to the dislocating patella. LÄS MER
3. PHYSIOLOGICAL AND BIOMECHANICAL FACTORS DETERMINING CROSS-COUNTRY SKIING PERFORMANCE
Sammanfattning : Cross-country (c.c.) skiing is a complex sport discipline from both physiological and biomechanical perspectives, with varying course topographies that require different proportions of the involved sub-techniques to be utilised. A relatively new event in c. LÄS MER
4. Analysis of Ball CV-joints of Fixed Type
Sammanfattning : Two theoretical models for analysing ball CV-joints of fixed type are presented. The models, which have been implemented in computer programs, calculate internal conditions such as load distribution, contact angles and displacements for different operating conditions. LÄS MER
5. Modelling and strength grading of structural timber and glulam lamellae on the basis of optical scanning and dynamic excitation
Sammanfattning : Machine strength grading of sawn timber is a sawmill process in which density, modulus of elasticity (MOE) and bending or tensile strength are predicted such that the timber can be assigned to strength classes. The predictions of these properties are performed using one or several so-called indicating properties (IPs), which represent a board property, or combination of board properties, measured non-destructively. LÄS MER