Sökning: "iron oxide particles"

Visar resultat 1 - 5 av 94 avhandlingar innehållade orden iron oxide particles.

1. 1. Screening of oxygen-carrier particles based on iron-, manganese-, copper- and nickel oxides for use in chemical-looping technologies

   Författare :Marcus Johansson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; Oxygen Carrier; Carbon Dioxide Capture; Chemical-Looping Combustion; Chemical-Looping Reforming; Nickel Oxide; Iron Oxide; Copper Oxide; Manganese Oxide;

   Sammanfattning : Capture and storage of carbon dioxide from combustion will likely be used in the future as a method of reducing emissions of greenhouse gases and thus be part of the overall strategy to stabilize the atmospheric levels of CO2. Chemical-looping combustion is a method of combustion where CO2 is inherently separated from the non-condensable components in the flue gas without the need for an energy intensive air separation unit. LÄS MER

3. 2. Degradation, Metabolism and Relaxation Properties of Iron Oxide Particles for Magnetic Resonance Imaging

   Författare :Karen Briley Saebo; Håkan Ahlström; Atle Bjørnerud; Michael Knopp; Uppsala universitet; []
   Nyckelord :MEDICIN OCH HÄLSOVETENSKAP; MEDICAL AND HEALTH SCIENCES; Radiology; Magnetic Resonance Imaging; contrast agents; iron oxide particles; metabolism; relaxation mechanisms; Radiologisk forskning; Radiological research; Radiologisk forskning;

   Sammanfattning : Whereas the effect of size and coating material on the pharmacokinetics and biodistribution of iron oxide based contrast agents are well documented, the effect of these parameters on liver metabolism has never been investigated. The primary purpose of this work was to evaluate the effect of iron oxide particle size and coating on the rate of liver clearance and particle degradation using a rat model. LÄS MER

4. 3. CVD on Iron Powder - Using Fluidising Bed Techniques

   Författare :Lars Nilsson; Industriell Produktion; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; aluminium oxide; alumina; chemical vapour deposition; eddy current losses; FBR; iron; fluidising bed reactor; powder; SiO2; SMC; TiO2; Al2O3; soft ma etic com sites; CVD;

   Sammanfattning : Today's electrical energy conversion devices, such as motors, transformers, inductors and generators, are based on laminated magnetic cores for reduction of eddy current losses, imposing a two-dimensional magnetic flux distribution. Using a three-dimensional magnetic flux distribution while maintaining low magnetic losses requires new approaches to magnetic core materials. LÄS MER

5. 4. Selection of oxygen carriers for chemical-looping combustion using methane as a fuel

   Författare :Marcus Johansson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Carbon Dioxide Capture; Nickel oxide; CO2 Separation; Oxygen Carrier; Iron oxide; Manganese oxide.; Chemical-Looping Combustion;

   Sammanfattning : In order to meet new demands on clean energy producing technologies, chemical-looping combustion could play an important role. With this technique, CO2 from the flue gases can be separated and collected without excessive energy and efficiency penalty. This is because nitrogen from the combustion air is never mixed with the fuel. LÄS MER

7. 5. Investigation of Nickel- and Iron-Based Oxygen Carriers for Chemical-Looping Combustion

   Författare :Erik Jerndal; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Carbon Dioxide Capture; Nickel Oxide; Fluidized Bed; Iron Oxide; Oxygen Carrier; Chemical-Looping Combustion; Ilmenite;

   Sammanfattning : Carbon capture and storage has the potential of reducing emissions of CO2, generated by combustion of fossil fuels. Chemical-looping combustion is a method intended to capture CO2 without an energy consuming gas separation process. LÄS MER