Sökning: "intermetallic particles"

Visar resultat 1 - 5 av 27 avhandlingar innehållade orden intermetallic particles.

  1. 1. Reactive Sintering of Cu-Al, Ni-Al and Ni-Ti Powder Mixtures

    Författare :Hossein Sina; Materialteknik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Sintering; In-situ microscopy; DSC; Intermetallic; aluminide;

    Sammanfattning : Intermetallic compounds are a distinct group of materials having attractive properties and wide applications. In the present work, the formation of intermetallic compounds from elemental components in Cu-Al, Ni-Al and Ni-Ti systems has been studied. Metallic powders were mixed in stoichiometric ratios corresponding to CuAl2, NiAl and NiTi. LÄS MER

  3. 2. Study of Ni3Al- and MoSi2-based Materials for High Temperature Structural Applications

    Författare :Karin Anne Xia Gong; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Intermetallic; Ni3Al; MoSi2;

    Sammanfattning : In general, the potential of current conventional high-temperature materials has been exploited to a large extent. The industries are therefore looking forward to development of alternative materials for their industrials application, which would be lighter, stronger and having improved higher temperature potential compared to the presently available alloys. LÄS MER

  4. 3. DFT calculations of initial localized corrosion of aluminum : Influence of aqueous ad-layer, chloride ions, and intermetallic particles

    Författare :Min Liu; Jinshan Pan; Ying Chen; KTH; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; aluminum alloys; alumina; chloride; surface adsorption; aqueous ad-layer; localized corrosion; corrosion initiation; work function; micro-galvanic effect; density-functional theory; Volta potential; scanning kelvin probe force microscopy; Kemi; Chemistry;

    Sammanfattning : Localized corrosion of aluminum (Al, here including Al alloys) involves a series of physico-chemical processes at the interface between the metal and the aqueous ad-layer or the aqueous solution. The mechanisms that govern localized corrosion are quite complex and have been the subject of many experimental studies. LÄS MER

  5. 4. The Role of Microstructure in the Atmospheric Corrosion of Selected Light Alloys and Composites

    Författare :Mohsen Esmaily; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; galvanic corrosion; Al content; microstructure; intermetallic particles; atmospheric corrosion; Al alloy 6xxx; casting; Mg-Al alloys; FSW P; BFSW.; Mg alloys-based MMCs;

    Sammanfattning : Magnesium-aluminum (Mg-Al) alloys, Mg-based metal matrix composites (MMCs) and Al alloys are among the best material candidates for future lightweight solutions. However, the use of these materials is limited by a number of issues, including the ability to resist corrosion. LÄS MER

  7. 5. Oxidation of Fe- and Ni-aluminides in Dry and Humid Atmospheres

    Författare :Adeline Velon; RISE; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; aluminide; alloying element; SEM; high temperature oxidation; intermetallic; XPS; Fe3Al; Cr; water vapour; Ni3Al; AES;

    Sammanfattning : Aluminides based on Ni3Al and Fe3Al offer good mechanical and corrosion properties at high temperatures and are therefore being considered in the automotive and chemical industries. The aim of this work was to study the early stages and the mechanisms of oxide growth on unalloyed Ni3Al and Fe3Al in air. LÄS MER