Sökning: "interfacial viscosity"
Visar resultat 1 - 5 av 21 avhandlingar innehållade orden interfacial viscosity.
1. Investigations of thermophysical properties of slags with focus on slag-metal interface
Sammanfattning : The objective of this research work was to develop a methodology for experimentally estimating the interfacial properties at slag-metal interfaces. From previous experiments carried out in the division, it was decided to use surface active elements like sulfur or oxygen to trace any motion at the interface. LÄS MER
2. Development of a Novel Method for Evaluation of Interfacial Tension between Polymer Melts
Sammanfattning : A novel method for the evaluation of interfacial tension of high viscosity polymer melts is described. The method involves the tracking of the shape evolution of a highly deformed droplet of one material imbedded in a second one. This makes it possible to determine the interfacial tension over a relatively short time period. LÄS MER
3. Study on some phenomena of slag in steelmaking process
Sammanfattning : The present work is to study slag phenomena in steelmaking process. In order to attain thegoal, a number of high temperature experiments and simulation experiments were carried out. Four master slags were used to study the effect of CaF2 on slag viscosity. LÄS MER
4. On particles and slags in steel casting
Sammanfattning : Hadfield steel is widely accepted as one of the most important steel alloys utilized in industrial applications where high impact strength and wear resistance is required. Like in most metallic alloys used for component casting, the mechanical properties of Hadfield steel are directly connected with the microstructure of the material. LÄS MER
5. Heat transfer phenomena and mould flux lubrication in continuous casting of steel
Sammanfattning : Overall thermal resistance of the mould flux was measured tomake clear the influence of the mould flux properties on theheat transfer behavior in continuous casting, especiallythermal conductivity and the formation of air gaps in thisstudy. From the investigation of the effect of the mouldsurface temperature and physical properties of the mould fluxon heat transfer through the flux film, following knowledge hasbeen obtained. LÄS MER