Sökning: "induction machine"

Visar resultat 6 - 10 av 48 avhandlingar innehållade orden induction machine.

1. 6. Stabilization of an induction machine drive

   Författare :Henrik Mosskull; KTH; []
   Nyckelord :;

   Sammanfattning : Modern electric trains almost exclusively use inductionmachines fed by voltage source inverters for propulsion. Toreduce external as well as internal disturbances, an LC-filteris inserted between the input terminals of the drive and theinverter. LÄS MER

3. 7. Synchronous Reluctance Machine (SynRM) in Variable Speed Drives (VSD) Applications

   Författare :Reza Rajabi Moghaddam; Chandur Sadarangani; Alfredo Vagati; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Synchronous Reluctance Machine SynRM ; Torque; Torque Ripple; Design; Optimization; FEM; Control; Standard Size; Measurement; Performance Comparison; Induction Machine IM ; Interior Permanent Magnet Machine IPM ; Variable Speed Drive VSD ; General Purpose GP ; Field Oriented Control FOC ; Direct Torque Control DTC ; Heat Run; Test; Thermal; Operation Diagram; Circle Diagram; Electrical engineering; Elektroteknik;

   Sammanfattning : This thesis is comprehensively dedicated to the theoretical and experimental reevaluation of the Synchronous Reluctance Machine (SynRM). A simple approach to derive the SynRM main characteristics and behavior is followed. An introduction to an evaluation of the different control strategies in is given. LÄS MER

4. 8. Measurements and Modelling of Low-frequency Disturbances in Induction Machines

   Författare :Torbjörn Thiringer; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Modelling; induction machine; measurements;

   Sammanfattning : in this thesis the low-frequency dynamic behavior of the induction machine is analyzed. disturbances in the shaft torque and supply voltage are investigated theoretically, The calculated response to shaft torque disturbances is verified with measurements on a 15 kW machine. LÄS MER

5. 9. Aspects on Wind Turbine Protections and Induction Machine Fault Current Prediction

   Författare :Marcus Helmer; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; saturation; Induction generator; Short circuit currents; Slip ring Generator; skin effect;

   Sammanfattning : This thesis presents detailed modelling of the induction machine with the main objective being accurate fault current prediction. The thesis focus mainly on mains connected induction machines and the response due to severe disturbances in the supply voltage, such as three-phase short-circuit faults. LÄS MER

7. 10. On Control of Back-to-Back Converters and Sensorless Induction Machine Drives

   Författare :Rolf Ottersten; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; active filtering; flux estimation; sensorless control; induction motor; back-to-back converter; pulsewidth-modulated rectifier; virtual flux; vector current control;

   Sammanfattning : This thesis focuses on design and analysis of the control system structure for back-to-back converter squirrel-cage induction machine drives. Particularly, sensorless control of induction machines, meaning vector control without a mechanical shaft sensor, and vector control of pulsewidth-modulated (PWM) rectifiers are considered. LÄS MER