Sökning: "hydrogen charging"
Visar resultat 1 - 5 av 13 avhandlingar innehållade orden hydrogen charging.
1. Phase transformation and stability studies of the Zr-H system
Sammanfattning : Zirconium alloys are widely used in the nuclear industry because of their high strength, good corrosion resistance and low neutron absorption cross-section. Zirconium has a strong affinity for hydrogen, however, and if hydrogen concentration builds up, the material will gradually degrade. LÄS MER
2. In-situ phase studies of the Zr-H system
Sammanfattning : Zirconium alloys are widely used in the nuclear industry because of their high strength, good corrosion resistance and low neutron absorption cross-section. However, zirconium has strong affinity for hydrogen, which may lead to hydrogen concentration build-up over time during a corrosion reaction when exposed to water. LÄS MER
3. Infrastructural requirements for indirect and direct electrification of road transportation
Sammanfattning : This thesis analyzes the integration of electricity and transportation systems for a future in which transportation is increasingly electrified. The focus is on exploring the infrastructures required for the indirect electrification of heavy transportation and the direct electrification of passenger vehicles. LÄS MER
4. Inconel 718 and Hydrogen
Sammanfattning : The nickel based superalloy IN718 is known to be sensitive to hydrogen, causing degradation of its mechanical properties. The degrading mechanism commonly proposed is based on an increased mobility and density of dislocations, caused by the dissolved hydrogen. This results in a decreased yield stress and a premature fracture. LÄS MER
5. Effect of water contamination on the diffused content of hydrogen under stress in AISI-52100 bearing steel
Sammanfattning : Abstract Hydrogen embrittlement is a degradation process of mechanical/tribological properties (toughness, wear etc.) of mating steel surfaces. This is caused by the presence and interaction of hydrogen with applied stresses. Therefore, it is important to quantify the hydrogen content which could be dissolved under applied stresses in steel. LÄS MER