Sökning: "hoop stresses"
Hittade 5 avhandlingar innehållade orden hoop stresses.
1. Hydrolytic degradation of dental composites and effects of silane-treatment and filler fraction on compressive strength and thermal expansion of composites
Sammanfattning : Some researchers have suggested that the weakest link of dental composites is the filler-matrix bond. However, due to incompleteness of information dealing with this bond and its stability in a humid environment, it was considered desirable to investigate the effect of water on this region, as well as the influence of filler bonding and filler fraction on compressive strength and thermal expansionExperimental composites containing different filler fractions of either silane-treated or untreated fillers were made. LÄS MER
2. Coining Residual Stresses in Aluminium Ship Structures: Experiments and FE- simulations
Sammanfattning : The build-up and redistribution of residual stresses obtained by stress coining of aluminium plates containing a hole have been studied experimentally and numerically. The foil strain gauge technique has been employed to measure strains at the bore of a hole during and after the coining process. LÄS MER
3. Comprehensive numerical analysis of stress state in adhesive layer of joint including thermal residual stress and material non-linearity
Sammanfattning : The main objective of this work is to improve understanding of the stress state in the adhesive layer of bonded joints and identify key parameters which govern performance of adhesive joints. This information is crucial for the prediction of the failure initiation and propagation with the further estimation of the durability and strength of adhesively bonded structures. LÄS MER
4. Structural Composite Lithium-Ion Battery : Effect of Intercalation induced volumetric changes on micro-damage
Sammanfattning : The quest for lighter materials and structures to reduce climate impacts in the automotive industry has paved the way for multifunctional solutions. Mass saving on a system level can be achieved by materials or structures having more than one primary function, thus reducing the number of components used. LÄS MER
5. Numerical simulation of weldment creep response
Sammanfattning : In-service inspections of high temperature pressureequipment show that weldments are prone to creep and fatiguedamage. It is not uncommon that severely damaged weldments arefound even before the design life of the component has beenreached. LÄS MER