Sökning: "high-pressure die casting"

Visar resultat 1 - 5 av 12 avhandlingar innehållade orden high-pressure die casting.

1. 1. On determining lost core viability in high-pressure die casting using Computational Continuum Mechanics

   Författare :Sebastian Kohlstädt; Pär Jönsson; Julio Hernandez; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; high-pressure die casting; lost salt cores; computational continuum mechanics; two-phase compressible flow; OpenFOAM; CFD; fluid-structure interaction; volume-of-fluid method;

   Sammanfattning : The subject of this thesis work is to investigate whether Computational ContinuumMechanics (CCM) can serve as a valuable tool for the casting engineerto determine a priori whether a housing concept with inlying geometries thatso far only exists in Computer Aided Design (CAD) will have the desired coolingperformance and will be manufacturable with an acceptable number ofrejects.As of spring 2019, no application in serial production of lost cores, i. LÄS MER

3. 2. Optimization product parts in high pressure die casting process

   Författare :Mohammad Sadeghi; Rebei Bel-fdhila; Dan Loyd; Mälardalens högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; industriell ekonomi och organisation; Industrial Economics and Organisations;

   Sammanfattning : This thesis describes optimization of die temperature in high pressure die-casting (HPDC) of A380 alloy by experimental observation and numerical simulation with the use of statistical tools. The goal of this research is to determine the optimum die temperature to minimize incidence of these defects and thus maximize production of parts without defects. LÄS MER

4. 3. Investigations on the Formation of Defect Bands in Semi-Solid High Pressure Die Cast Aluminium-Silicon Alloys

   Författare :Madeleine Law; Pär Jönsson; Christopher Hulme-Smith; Taishi Matsushita; Jessica Elfsberg; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Semi-Solid Metals; SSM; Al-Si Alloys; Defect bands; HPDC; Semisolida metaller; SSM; Al-Si-Alloys; defektband; HPDC; Metallurgical process science; Metallurgisk processvetenskap;

   Sammanfattning : High-pressure die casting of semi-solid aluminium-silicon alloys is used in the automotive industry to manufacture components, like housings, brackets, and bars. It is commonly known that during high-pressure die casting, defect bands may be created that follow the contour of the component surface. These bands consist mainly of a eutectic phase. LÄS MER

5. 4. The Role of Microstructure in the Atmospheric Corrosion of Selected Light Alloys and Composites

   Författare :Mohsen Esmaily; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; galvanic corrosion; Al content; microstructure; intermetallic particles; atmospheric corrosion; Al alloy 6xxx; casting; Mg-Al alloys; FSW P; BFSW.; Mg alloys-based MMCs;

   Sammanfattning : Magnesium-aluminum (Mg-Al) alloys, Mg-based metal matrix composites (MMCs) and Al alloys are among the best material candidates for future lightweight solutions. However, the use of these materials is limited by a number of issues, including the ability to resist corrosion. LÄS MER

7. 5. Characteristics of cast magnesium alloys : microstructures, defects and mechanical properties

   Författare :Haiping Cao; Anders Jarfors; Linköpings universitet; []
   Nyckelord :Mg alloys; microstructure; mechanical properties; defects; modelling; segregation bands; hot tear; mould constraint; semi-solid casting.; TECHNOLOGY; TEKNIKVETENSKAP;

   Sammanfattning : Magnesium is the lightest of all structural metals. As such, and combined  with good mechanical and physical properties, it forms the basis for commercial alloys that have found successful use in a wide variety of applications. LÄS MER