Sökning: "high density powder metallurgical materials"
Visar resultat 1 - 5 av 7 avhandlingar innehållade orden high density powder metallurgical materials.
1. Processing Methods for Reaching Full Density Powder Metallurgical Materials
Sammanfattning : Powder metallurgy (PM) is one of the most cost effective methods for manufacturing structural components with complex shapes. Utilisation of the metal powder to shape the components allows to minimise material waste and increase energy efficiency. LÄS MER
2. Optimizing liquid phase sintering of ferrous powder metallurgical materials
Sammanfattning : The properties of powder metallurgical, PM, components are dependent on that the dilemma of full density and suitable microstructure is resolved. Whilst it is often possible to achieve full density, it may or may not coincide with a suitable microstructure. LÄS MER
3. ROLE OF SURFACE OXIDES IN SINTERING OF CHROMIUM-ALLOYED STEEL POWDER
Sammanfattning : During water-atomisation and handling of steel powder the surface inevitably oxidises. The surface bound oxide is an important factor in the processing of powder metallurgical (PM) steels, especially in case the powder contains elements forming stable oxides, such as Cr, Mn, and Si. LÄS MER
4. High Performance Manufacture of Sintered Steel – Critical Aspects of Tooling Performance and Sintered Microstructure
Sammanfattning : Steel is the dominant material for the production of structural parts. By means of powder metallurgy (PM) processing, manufacturers have been able to manufacture steel parts with appreciable dimensional accuracy and desirable mechanical properties. LÄS MER
5. Atomic-scale modelling of interfaces in cemented carbides: wetting and strength
Sammanfattning : Cemented carbides are composite materials of great technological and industrial importance. They have a unique combination of hardness and toughness and are therefore used widely as tool materials in applications where both high hardness and toughness are demanded. These applications include among others: mining, turning, cutting and milling. LÄS MER