Sökning: "heat release rate"
Visar resultat 16 - 20 av 79 avhandlingar innehållade orden heat release rate.
16. The Development of a European Fire Classification System for Building Products - Test Methods and Mathematical Modelling
Sammanfattning : The fire technical properties of products are determining factors for the initiation and growth of fires. Measurement of fire technical properties and the understanding of how they relate to real hazards are therefore important for fire safety. LÄS MER
17. Post-Detonation Afterburning of High Explosives
Sammanfattning : High performance of an explosive compound with respect to afterburning requires sufficient combustible properties of the explosive, and a careful determination of the most appropriate charge positioning to achieve the desired afterburning effect. Understanding the physical processes of post-detonation afterburning and how these are affected by the surroundings, e. LÄS MER
18. A Linearized Navier-Stokes Equations Methodology for Aeroacoustic and Thermoacoustic Simulations
Sammanfattning : Aeroengine noise is one of the dominating noise sources in today’s aircraft. Reduction of the aeroengine noise is related to multiphysics phenomena, and that is subject to different mechanisms, e.g., the coupling between turbulence, flame and sound waves. LÄS MER
19. High-Temperature Corrosion in Waste-Fired Boilers: Insights into material selection for fluidized bed heat exchangers and the corrosivity of PbCl2
Sammanfattning : The replacement of fossil fuels with waste-derived fuels for heat and electricity production has gained significant momentum in the European Union (EU), especially in the wake of the implementation of stricter waste management directives and the pursuit of ambitious climate goals. Combustion of waste, however, leads to the formation of a complex and highly corrosive flue gas that cause severe corrosion on important boiler equipment. LÄS MER
20. Modeling of Pulverised Wood Flames
Sammanfattning : The aim of the current work was at development and validation of modeling tools for simulation of pulverised wood flames in furnaces and study how different factors influence on such flames. The numerical model involves different sub-models for the physo-chemical processes, such as, two-phase flow motion, drying, devolatilization and shrinkage of particles, the formation and oxidation of volatile, tar and char, turbulence-chemistry interaction, turbulence-radiation interaction, etc. LÄS MER