Sökning: "heat exchanger efficiency"

Visar resultat 1 - 5 av 47 avhandlingar innehållade orden heat exchanger efficiency.

  1. 1. Performance Analysis and Optimal Design of Heat Exchangers and Heat Exchanger Networks

    Författare :Lieke Wang; Värmeöverföring; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; applied thermodynamics; Thermal engineering; flexibility; pinch technology; optimization; heat exchanger networks; thermal efficiency; multi-stream; plate-fin heat exchangers; plate heat exchangers; steam condensation; heat exchangers; Termisk teknik; termodynamik; Gases; fluid dynamics; plasmas; Gaser; fluiddynamik; plasma;

    Sammanfattning : This thesis presents a study on performance analysis and optimal design of heat exchangers and heat exchanger networks. The study includes an experimental investigation of steam condensation in plate heat exchangers, optimal design of plate heat exchangers and plate-fin heat exchangers, and optimization of heat exchanger networks. LÄS MER

  2. 2. Flow Boiling Heat Transfer in Single Vertical Channels of Small Diameter

    Författare :Claudi Martin Callizo; Björn Palm; Predrag Hrnjak; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; microchannel; heat exchanger; heat transfer; flow boiling; flow patterns; onset of nucleate boiling; dryout; critical heat flux; Mechanical and thermal engineering; Mekanisk och termisk energiteknik;

    Sammanfattning : Microchannel heat exchangers present many advantages, such as reduced size, high thermal efficiency and low fluid inventory; and are increasingly being used for heat transfer in a wide variety of applications including heat pumps, automotive air conditioners and for cooling of electronics.However, the fundamentals of fluid flow and heat transfer in microscalegeometries are not yet fully understood. LÄS MER

  3. 3. Sustainable building ventilation solutions with heat recovery from waste heat

    Författare :Behrouz Nourozi; Sture Holmberg; Adnan Ploskic; Qian Wang; Shia-Hui Peng; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; wastewater heat recovery; balanced mechanical ventilation; defrosting reduction; heat recovery efficiency; thermal load shifting; renewables; Civil and Architectural Engineering; Byggvetenskap;

    Sammanfattning : The energy used by building sector accounts for approximately 40% of the total energy usage. In residential buildings, 30-60% of this energy is used for space heating which is mainly wasted by transmission heat losses. A share of 20-30% is lost by the discarded residential wastewater and the rest is devoted to ventilation heat loss. LÄS MER

  4. 4. Laminar-flow Liquid-to-air Heat Exchangers - Energy-efficient Display Cabinet Applications

    Författare :Caroline Haglund Stignor; Värmeöverföring; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; energy-efficiency; indirect cooling; display cabinet; pressure drop; heat transfer; flat-tube heat exchanger; cooling coil; laminar;

    Sammanfattning : Provisions are stored and displayed in supermarkets and grocery stores, at a temperature lower than the ambient, in display cabinets, which are responsible for a significant amount of the energy use in this sector. During the 1990s, major changes in the regulations governing the use of synthetic refrigerants took place in Sweden. LÄS MER

  5. 5. Novel Approaches for Retrofitting Heat Exchanger Networks Subject to Varying Operating Conditions

    Författare :Christian Langner; Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; Multi-Period Optimization; Flexibility; Critical Points; Feasibility; Heat Integration; Process Industry; Energy Efficiency; Retrofit;

    Sammanfattning : The process industry is responsible for a significant share of the final industrial energy use in Sweden. In particular, the pulp and paper industry accounts for more than 50 %. In this context, a number of studies have shown that there is a substantial potential for energy savings in the pulp and paper industry. LÄS MER