Sökning: "gear grinding"

Hittade 5 avhandlingar innehållade orden gear grinding.

  1. 1. Gear Surface Machining for Noise Suppression

    Författare :Naser Amini; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; gear grinding; gear shaving; gears; undulation; surface topography; noise; automotive gearboxes; ghost harmonics; gear honing;

    Sammanfattning : Gear noise in modern automobiles is unacceptable. It has different sources, such as design parameters and manufacturing errors. Manufacturing errors, for example, can be reduced using advanced grinding operations. However, sometimes grinding operations can introduce micro-geometry deviations that cause severe noise problems. LÄS MER

  3. 2. Gear tribology : friction and surface topography

    Författare :Li Xiao; Bengt-Göran Rosén; Liam Blunt; Högskolan i Halmstad; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Friction; Surface topography; Toughness; Lay; Gears; Power transmission; TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : The quest for energy efficiency leads to the development of highly efficient power transmissions for vehicles. Gears are some of the most rugged and durable torque transmitters among machine elements. Friction between sliding surfaces at gear teeth is one major source of power loss. LÄS MER

  4. 3. On tribological design in gear tooth contacts

    Författare :Ellen Bergseth; Ulf Olofsson; Karsten Stahl; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; friction; gear contact; gear manufacturing; surface boundary layers; surface topography; wear;

    Sammanfattning : The correct tribological design will have a considerable effect on a gear’s service life and efficiency. The purpose of this thesis is to clarify the impact of variation in the gear tooth flank tribological system on the gear contact load capacity – to increase the understanding of how surface topography and lubricant interact. LÄS MER

  5. 4. Surface Integrity of Case-hardened Gears - with Particular Reference to Running-in and Micropitting

    Författare :Dinesh Mallipeddi; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; surface chemistry; residual stresses; surface asperities; micropitting; running-in; Gears; plastic deformed regions PDR ; deformation bands;

    Sammanfattning : A gearbox with gears of different sizes is part of a vehicle transmission system and plays an important part in transmitting the engine power to the wheels. The efficient energy transmission highly relies on the performance of gears. Together, the mesh efficiency and durability determines the performance of gears. LÄS MER

  7. 5. Surface Integrity Characterization of Gears with respect to Running-in

    Författare :Dinesh Mallipeddi; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; micropitting; surface asperities; running-in; surface roughness; residual stresses; Gears; surface chemistry;

    Sammanfattning : A gearbox with gears of different sizes is part of a vehicle transmission system that plays an important part in transmitting the engine power to the wheels. The efficient energy transmission highly relies on the performance of gears. Together, the mesh efficiency and durability determines the gear performance. LÄS MER