Sökning: "gas flow"

Visar resultat 1 - 5 av 770 avhandlingar innehållade orden gas flow.

1. 1. Flow measurements related to gas exchange applications

   Författare :Fredrik Laurantzon; Henrik Alfredsson; Venkatesa Vasanta Ram; KTH; []
   Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Flow meters; vortex flow meters; compressible flow; pulsating flow; hot-wire anemometry; cold-wire anemometry; time resolved measurements; wavelet analysis;

   Sammanfattning : This thesis deals with flow measuring techniques applied to steady and pulsating gas flows relevant to gas exchange systems for internal combustion engines. Gas flows in such environments are complex, i.e. they are inhomogeneous, three-dimensional, unsteady, non-isothermal and exhibit significant density changes. LÄS MER

3. 2. Non-Spherical Particle Interaction in Duct and Jet Flow

   Författare :Ammar Hazim; Luleå tekniska universitet; []
   Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Solid-gas flow; turbulence modulation; duct flow; coaxial jets flow; swirl jet flow; active flow control; synthetics jet; biomass powder; non-spherical particles; PIV measurement; Strömningslära; Fluid Mechanics;

   Sammanfattning : Wood waste is the most popular biomass recourse for many nations. Burned wood can, direct or indirect, release one of the greenhouse gases, carbon dioxide. The process can still be seen as a renewable source of energy since replanting of the trees and crops are consuming nearly the same amount of carbon dioxide through photosynthesis. LÄS MER

4. 3. Flow Measuring Techniques in Steady and Pulsating Compressible Flows

   Författare :Fredrik Laurantzon; Henrik Alfredsson; Björn Lindgren; KTH; []
   Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; Flow measuring; compressible flow; steady flow; pulsating flow; hot-wire anemometry; cold-wire anemometry; Engineering mechanics; Teknisk mekanik;

   Sammanfattning : This thesis deals with flow measuring techniques applied on steady and pulsatingflows. Specifically, it is focused on gas flows where density changes canbe significant, i.e. compressible flows. LÄS MER

5. 4. Conceptual Thermodynamic Cycle and Aerodynamic Gas Turbine Design - on an Oxy-fuel Combined Cycle

   Författare :ADRIAN NILSSON DAHLQVIST; Kraftverksteknik; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Gas turbine; combined cycle; conceptual design; aerodynamic; mid-span design; through-flow design; oxy-fuel; SCOC-CC; OCC; gas turbine; Combined cycle; conceptual design; aerodynamic; mid-span design; Through-flow design; Oxy-fuel; SCOC-CC; OCC;

   Sammanfattning : The world is today facing a serious problem with global warming, which is heading towards an appallingly high temperature level. The greater part of the overall climate science community agree that global warming is caused by the greenhouse effect, which depends largely on emitted CO2 emissions from the combustion of fossil fuel. LÄS MER

7. 5. Characterization of Chimney Flue Gas Flows : Flow Rate Measurements with Averaging Pitot Probes

   Författare :Janne Paavilainen; Chris Bales; Jan-Olof Dalenbäck; Lennart Gustavsson; Högskolan Dalarna; []
   Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Flue gas; measurement; characterization; averaging Pitot tube; SolNET;

   Sammanfattning : Performance testing methods of boilers in transient operating conditions (start, stop and combustion power modulation sequences) need the combustion rate quantified to allow for the emissions to be quantified. One way of quantifying the combustion rate of a boiler during transient operating conditions is by measuring the flue gas flow rate. LÄS MER