Sökning: "fluid simulation"
Visar resultat 21 - 25 av 598 avhandlingar innehållade orden fluid simulation.
21. Numerical Simulation of High Reynolds Number Wall Bounded Flow
Sammanfattning : In this thesis, four different numerical methods are used for predictions of high Reynoldsnumber (Re), wall bounded flows; Large Eddy Simulation (LES) with two different subgrid(turbulence) models, the One Equation Eddy Viscosity model (OEEVM) and the MixedModel (MM), Monotone Integrated LES (MILES), Detached Eddy Simulation (DES) andReynolds Averaged Navier Stokes (RANS). The LES calculations are combined with a wallmodel based on the law-of-the-wall and in DES a hybrid RANS/LES method is used forhandling the near wall region. LÄS MER
22. Large eddy simulation of cavitating and non-cavitating flow
Sammanfattning : Most marine configurations are subject to a number of complex and important hydrodynamic phenomena affecting the overall performance of the vessel, both regarding resistance and propulsive efficiency. In this thesis, the possibility of numerically simulating some of these phenomena is investigated. LÄS MER
23. Analytical Aerodynamic Simulation Tools for Vertical Axis Wind Turbines
Sammanfattning : Wind power is a renewable energy source that is today the fastest growing solution to reduce CO2 emissions in the electric energy mix. Upwind horizontal axis wind turbine with three blades has been the preferred technical choice for more than two decades. This horizontal axis concept is today widely leading the market. LÄS MER
24. Modelling and simulation of turbulence subject to system rotation
Sammanfattning : Simulation and modelling of turbulent flows under influence of streamline curvature and system rotation have been considered. Direct numerical simulations have been performed for fully developed rotating turbulent channel flow using a pseudo-spectral code. The rotation numbers considered are larger than unity. LÄS MER
25. Large Eddy Simulation of Swirling Reacting Flows
Sammanfattning : The combustion of fossil fuels remains a key technology as these fuels are the main source of energy in the foreseeable future. Heat released in combustion is often accompanied by emission of undesired soot, CO and NOx pollutants. LÄS MER