Sökning: "fluid limit"

Visar resultat 1 - 5 av 127 avhandlingar innehållade orden fluid limit.

  1. 1. Combustion, Fluid Dynamics and Heat Transfer in Oxy-fuel and Air-Fired CFB boilers

    Författare :Sadegh Seddighi; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Carbon Capture and Storage; Combustion; Circulating Fluidized Bed; Oxy-Fuel; Multi-Phase Reacting Flow; Boiler Design; Emission; Fluid Dynamics; Heat Transfer;

    Sammanfattning : The studies described in this thesis develop and encode modeling tools for the design and scale-up of oxy-fuel circulating fluidized bed (CFB) boilers across a wide range of operational conditions. The modeling comprises fluid dynamics, combustion, and heat transfer and uses expressions that are proposed in this work or derived from the literature, together with experimental data obtained under both oxy-fuel-fired and air-fired conditions. LÄS MER

  3. 2. The influence of inertia on the rotational dynamics of spheroidal particles suspended in shear flow

    Författare :Tomas Rosén; Fredrik Lundell; Minh Do-Quang; Johan Revstedt; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fluid mechanics; dispersed particle flows; inertia; non-spherical particles; non-linear dynamics; Engineering Mechanics; Teknisk mekanik;

    Sammanfattning : Dispersed particle flows occur in many industrial, biological and geophysical applications. The knowledge of how these flow behave can for example lead to improved material processes, better predictions of vascular diseases or more accurate climate models. LÄS MER

  4. 3. LES of Jets and Sprays Injected into Crossflow

    Författare :Mirko Salewski; Strömningsteknik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Gaser; fluid dynamics; large eddy simulation; spray; plasmas; Gases; lagrangian particle tracking; jet in crossflow; fluiddynamik; plasma;

    Sammanfattning : The objective of this thesis is to numerically simulate a fluid jet injected into a crossflow of the same or another fluid, respectively. Such flows are encountered in many engineering applications in which cooling or mixing plays an important role, e.g. gas turbine combustors. LÄS MER

  5. 4. Advanced Fluid-Structure Interaction Modelling and Simulation for Aerospace Applications

    Författare :Stefan Nilsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; aeroacoustics; Hybrid RANS-LES; CSD; cavity flow; aeroelastics; CFD; FSI;

    Sammanfattning : Numerical fluid-structure interaction (FSI) methods for the prediction of aeroelastic phenomena are important within aerospace. The continuous development of computer technologies has enabled the use of more advanced FSI methods. The use of advanced methods has the potential to provide more accurate predictions. LÄS MER

  7. 5. A sensitivity analysis of the Winter-Kennedy method

    Författare :Binaya Baidar; Michel J. Cervantes; Mikael Sendelius; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hydropower; discharge; Winter-Kennedy; CFD; Sensitivity; Strömningslära; Fluid Mechanics;

    Sammanfattning : Hydropower is among the lowest-cost electrical energy sources due to its long lifespan and lower operation and maintenance cost. The hydro-mechanical components of hydropower plants generally last about four to five decades, then they are either overhauled or replaced. LÄS MER