Sökning: "fluid flow"

Visar resultat 21 - 25 av 1348 avhandlingar innehållade orden fluid flow.

1. 21. Fluid dynamics and flow structures of wood fibres suspended in gas flows

   Författare :Olof Melander; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; two-fluid model; fibres; flocculation; multiphase flow; flow regimes; particle transport; fibre suspensions; Particle Image Velocimetry; Computational Fluid Dynamics; lift force; concentration measurement;

   Sammanfattning : The flow of wood fibres suspended in gas plays a major role in the MDF (Medium Density Fibreboard) production process. Development of machinery in this industry has traditionally been based on experience. Only recently has the use of numerical methods such as CFD (Computational Fluid Dynamics) become an important part of the development process. LÄS MER

3. 22. Experimental Study on Truck Related Power Losses: The Churning Losses in a Transmission Model and Active Flow Control at an A-pillar of Generic Truck Cabin Model

   Författare :Erwin Adi Hartono; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hot wire anemometry; Machine learning; Computational Fluid Dynamics; A-Pillar; Transmission; Flow separation; Churning losses; CFD; Gearbox; Torque measurement; Particle Image Velocimetry; Smoothed Particle Hydrodynamics.; Active Flow Control; SPH; Curve fit; Synthetic Jets; Load independent power losses; Aeration; Flow visu- alization;

   Sammanfattning : The fight with global warming constantly forces vehicle manufacturers to innovate, in order to be able to reduce the CO2 emissions of their product. This means that marginal efficiency gains in every component are considered beneficial for total reduction of CO2 emissions. LÄS MER

4. 23. Experimental study of turbulent flows through pipe bends

   Författare :Athanasia Kalpakli; P. Henrik Alfredsson; Ramis Örlü; Christoph Brücker; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Turbulent flow; swirl; pulsation; pipe bend; hot-wire anemometry; cold-wire anemometry; laser Doppler velocimetry; stereoscopic particle image velocimetry.;

   Sammanfattning : This thesis deals with turbulent flows in 90 degree curved pipes of circular cross-section. The flow cases investigated experimentally are turbulent flow with and without an additional motion, swirling or pulsating, superposed on the primary flow. LÄS MER

5. 24. A study of hydroelastic fluid-structure interaction with application to immersed cantilevers

   Författare :Johan Lorentzon; Strömningsteknik; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Partitioned Fluid-Structure; Blocked Gauss-Seidel; Jacobian-free Newton-Krylov methods; Incompressible fluid; Finite Strain; Total Lagrangian; Arbitrary Lagrange Euler method; Vector acceleration;

   Sammanfattning : This study presents an approach for partitioned fluid-structure interaction (FSI) applied to large structural deformations, where an incompressible turbulent solver is combined with a structural solver. The implementation is based upon two different open-source libraries by using MPI as a parallel communication protocol, the packages deal. LÄS MER

7. 25. Modal Decomposition of Separated Nozzle Flow

   Författare :Ragnar Larusson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Arnoldi; axisymmetric convergent-divergent nozzle; Mode Decomposision; Flow Separation; Resonance.; Dynamic Mode Decomposision; Computational Fluid Dynamics;

   Sammanfattning : The applicability of two different eigenvalue algorithms coupled with an axisymmetric RANS solver to predict the eigenmodes of separated supersonic flow inside an axisymmetric convergent-divergent nozzle was investigated. These are the Arnoldi and the Dynamic Mode Decomposition (DMD) algorithms, respectively. LÄS MER