Sökning: "finite element method FEM"

Visar resultat 11 - 15 av 158 avhandlingar innehållade orden finite element method FEM.

1. 11. Optimisation of Machining Operations by means of Finite Element Method and Tailored Experiments

   Författare :Amir Malakizadi; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Response Surface Methodology; inverse identification; bi-metals; flank wear; Wear modelling; thermal fatigue cracking; Finite Element Method; Usui’s model; metal cutting; Johnson-Cook;

   Sammanfattning : The experimental approach has long been the main method to investigate the responses associated with metal cutting process such as cutting forces and temperatures and also to optimise the machining operations to accomplish higher productivity. In recent years, with advances in computing power of computers along with development of robust numerical methods such as Finite Element Method (FEM), it has been possible to simulate different machining process under operational conditions. LÄS MER

3. 12. Optimisation of Machining Operations by means of Finite Element Method and Tailored Experiments

   Författare :Amir Malakizadi; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Usui wear model; Bi-metals; Flank wear; Johnson-Cook; Inverse identification; Metal cutting; Thermal fatigue cracking; Wear modelling; Finite element method; Response surface methodology;

   Sammanfattning : Traditionally, costly experimental procedures have been followed in industry to optimise the machining operations to secure the maximum efficiency in production line, while the functional requirements of the machined surfaces are fulfilled. In recent years, development of robust numerical techniques such as Finite Element Method (FEM) and advances in computing capacity of computers have made it possible to simulate the machining operations under operational conditions. LÄS MER

4. 13. High Order Symmetric Finite Difference Schemes for the Acoustic Wave Equation

   Författare :Abraham Zemui; Bertil Gustafsson; Leif Abrahamsson; Per Weinerfelt; Uppsala universitet; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; finite element method; mass lumping; high order; finite difference method; wave equation; Numerical Analysis; Numerisk analys;

   Sammanfattning : When someone speaks, or when a piano is played, sound waves are spread through the room. Physically the propagation of sound is governed by the acoustic wave equation. This thesis deals with the problem of finding solutions to this equation by numerical methods. LÄS MER

5. 14. Finite Element Procedures in Modelling the Dynamic Properties of Rubber

   Författare :Anders K Olsson; Byggnadsmekanik; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; akustik; vibration and acoustic engineering; Materiallära; materialteknik; Mechanical engineering; hydraulics; vacuum technology; Material technology; dynamic; amplitude; frequency; Technological sciences; Teknik; FEM; rubber; vibrationer; vakuumteknik; Maskinteknik; hydraulik;

   Sammanfattning : Rubber is not only a non-linear elastic material, it is also dependent on strain rate, temperature and strain amplitude. The non-linear elastic property and the strain amplitude dependence give a non-linear dynamic behavior that is covered by the models suggested in this thesis. LÄS MER

7. 15. Demagnetization Studies on Permanent Magnets : Comparing FEM Simulations with Experiments

   Författare :Stefan Sjökvist; Sandra Eriksson; Hans Bernhoff; Mårten Grabbe; Uppsala universitet; []
   Nyckelord :Permanent magnet; demagnetization; simulation; FEM; Comsol Multiphysics; VAWT; Engineering Science with specialization in Science of Electricity; Teknisk fysik med inriktning mot elektricitetslära;

   Sammanfattning : In a world where money often is the main controlling factor, everything that can be tends to be more and more optimized. Regarding electrical machines, developers have always had the goal to make them better. LÄS MER