Sökning: "filler level"
Visar resultat 11 - 15 av 21 avhandlingar innehållade orden filler level.
11. Study on the Interaction between Refractory and Liquid Steel Regarding Steel Cleanliness
Sammanfattning : The present thesis focuses on the interaction between refractory and liquid steel. The aim of this work is to understand the interaction behavior between refractory and liquid steel regarding steel cleanliness. The effect of different refractories on different inclusions in Al-killed steel was studied in a furnace. LÄS MER
12. Welds in the lean duplex stainless steel LDX 2101 : effect of microstructure and weld oxides on corrosion properties
Sammanfattning : Duplex stainless steels are a very attractive alternative to austenitic grades due to their higher strength and good corrosion performance. The austenitic grades can often be welded autogenously, while the duplex grades normally require addition of filler metal. LÄS MER
13. Microstructure and properties of welds in the lean duplex stainless steel LDX 2101
Sammanfattning : Duplex stainless steels can be very attractive alternatives to austenitic grades due to their almost double strength at equal pitting corrosion resistance. When welding, the duplex alloys normally require addition of filler metal, while the commodity austenitic grades can often be welded autogenously. LÄS MER
14. New Experimental and Modelling Tools for Multiscale Characterization of Asphalt Mastic
Sammanfattning : Asphalt mastics act as a binding phase in asphalt mixtures and their rheological properties strongly affect the performance of asphalt mixtures with respect to virtually all damage modes. In order to measure mastics properties, relevant for field performance, testing should be performed at size-scales representative for the morphology and material inhomogeneity of asphalt mixtures. LÄS MER
15. Industrial Application of Sulfur Concrete An Environment-friendly Construction Material
Sammanfattning : Sulfur Concrete (SC) is a thermoplastic constructionmaterial, of mineral aggregates and modified sulfur as binder.Elemental sulfur has now a low smelting point (120oC) and appears in two solid allotropic forms,separated by considerable contraction. Hence, the need formodification to delay the transition. LÄS MER