Sökning: "field test"

Visar resultat 16 - 20 av 1058 avhandlingar innehållade orden field test.

  1. 16. Grouting of Hard Rock with Gelling Liquids, Field and Laboratory Studies of Silica sol

    Författare :Johan Funehag; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; aperture; penetration length; gelling liquids; field study; silica sol; colloidal silica; Grouting; propagation; hydraulic test; sand column; rheology; transmissivity;

    Sammanfattning : Recent grouting projects in Sweden have concentrated on the grout itself. The only grout normally used in Sweden is a cement-based one. During the past 10 years, the acceptable flow of water into tunnels has been significantly reduced. The current requirements mean that an average fracture aperture of around 0. LÄS MER

  3. 17. Run-Up Transient Analysis for Salient Pole Wound Field Synchronous Motors : Field winding and power electronics implications for a smoother and cooler asynchronous start

    Författare :Roberto Felicetti; Urban Lundin; Andreas Binder; Uppsala universitet; []
    Nyckelord :apparent resistance; cable modeling; current control; transmission line model; eddy currents; field winding; frequency analysis response; Fourier Transform; impedance mismatch; main inductance; overvoltage; parasitic capacitance; partial discharge; quality factor; ringing; slew rate; stray inductance; voltage gradient; winding resonance frequency; asynchronous start; run-up; torque ripple; reluctance torque; Engineering Science with specialization in Science of Electricity; Teknisk fysik med inriktning mot elektricitetslära;

    Sammanfattning : Salient Pole Wound Field Synchronous Machines have better efficiency at full load than asynchronous machines of the same capability. Moreover, where asynchronous machines need inherently to draw a magnetizing current from the grid, Salient Pole Wound Field Synchronous Machines can work efficiently at unity power factor. LÄS MER

  4. 18. Visualization of Air Flow, Temperature and Concentration Indoors : Whole-field measuring methods and CFD

    Författare :Mathias Cehlin; Mats Sandberg; Alfred Moser; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Environmental engineering; Miljöteknik; Whole-field;

    Sammanfattning : The thermal indoor climate is a complicated combination of a number of physical variables, all of which strongly affect people’s well-being. The indoor climate not only heavily affects people’s health and life quality, but also their productivity and ability to work efficiently. LÄS MER

  5. 19. Test Design for Finite Element Model Updating - Identifiable Parameters and Informative Test Data

    Författare :Andreas Linderholt; Thomas Abrahamsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; modal tests; test design; identifiability; Fisher information; optimization; data informativeness; model updating; Maskinteknik;

    Sammanfattning : It is important to predict structural phenomena, such as noise and fatigue, stemming from vibrations. To do this, reliable structural dynamic models are needed. To be useful the models have to compare well with reality in the validation against test data; if not, the models should be modified. LÄS MER

  7. 20. Recycling Inorganic Residues from Wood-based Industries to the Forest- study of Treatment Techniques and Leaching Characteristics

    Författare :Maryam Mahmoudkhani; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; Diffusion; Treatment techniques; Alkaline solid residues; Heterogeneous reactions; Modified column-pHstat test; Recycling; Leaching; Characterization; Field test;

    Sammanfattning : Abstract. In order to minimize the negative impact of loss of nutrients in the forest soil (when harvesting the wood), inorganic solid residues, from wood-based industries, have to be recycled back to the forest soil. LÄS MER