Sökning: "fibre suspensions"

Visar resultat 1 - 5 av 36 avhandlingar innehållade orden fibre suspensions.

  1. 1. Fibre flow mechanisms

    Författare :Roger Bergström; Ulf Björkman; Bo Norman; Mark Martinez; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fibre flow; floc; shear; compression; fibre network; stress chain; Cellulose and paper engineering; Cellulosa- och pappersteknik;

    Sammanfattning : The flow behaviour, and primarily the floc-floc interaction, of pulp paper suspensions have been studied visually. Analogy models based on these observations have been developed as well as the identification of important parameters of floc break-up in low shear rate flow fields. LÄS MER

  3. 2. Near wall fibre orientation in flowing suspensions

    Författare :Allan Carlsson; Daniel Söderberg; Fredrik Lundell; Helge I. Andersson; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; fluid mechanics; fibre orientation; shear flow; wall effect; fibre suspension; papermaking; Fluid mechanics; Strömningsmekanik;

    Sammanfattning : This thesis deals with fibre orientation in wall-bounded shear flows. The primary application in mind is papermaking. The study is mainly experimental,but is complemented with theoretical considerations.The main part of the thesis concerns the orientation of slowly settlingfibres in a wall-bounded viscous shear flow. LÄS MER

  4. 3. Fluid mechanics of fibre suspensions related to papermaking

    Författare :Richard Holm; Gustav Amberg; R. Krekes; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Applied mechanics; applied fluid mechanics; fibre suspensions; roll-forming; sedimentation; shear flow; Teknisk mekanik; Engineering mechanics; Teknisk mekanik;

    Sammanfattning : This thesis deals with fluid dynamic mechanisms related to papermaking, specif- ically: the initial dewatering mechanisms during roll-forming and fibre motion in sedimentation and in shear flow. Pressure and wire position measurements have been conducted in a model resembling the forming zone and the measured pressure distributions are shown to have more complex patterns than the simple model p / T/R (where T is the wire tension and R is the roll radius). LÄS MER

  5. 4. Towards a measurement of paper pulp quality : ultrasonic spectroscopy of fibre suspensions

    Författare :Yvonne Aitomäki; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Industrial Electronics; Industriell elektronik;

    Sammanfattning : For the paper and pulp industry in Sweden and Finland to remain competitive against countries with lower overheads, they have to constantly strive to improve the quality and the efficiency of the manufacturing processes. One of the ways of doing this is to introduce sensors that will provide valuable online feedback on the characteristics of the pulp so that adjustments can be made to optimise the manufacturing process. LÄS MER

  7. 5. Rheological measurements on fibre suspension

    Författare :Mina Djalili-Moghaddam; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; silicone oil; viscosity; rotational rheometry; normal stress difference; parallel plate; cone and plate; geometry effects; fibre suspensions;

    Sammanfattning : .... LÄS MER