Sökning: "failure modelling"

Visar resultat 1 - 5 av 163 avhandlingar innehållade orden failure modelling.

  1. 1. Sensory integration success & failure

    Detta är en avhandling från Luleå : Luleå tekniska universitet

    Författare :Tamas Jantvik; Luleå tekniska universitet.; [2009]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Technology - Electrical engineering; electronics and photonics; Teknikvetenskap - Elektroteknik; elektronik och fotonik; Industriell elektronik; Industrial Electronics;

    Sammanfattning : The convergence of sensory signals plays an important role in perception. Two cases of convergence are examined in this thesis by means of modelling; the case when the converging signals are congruent, which leads to combination and an enhancement of perception, and the case when they are incongruent. LÄS MER

  2. 2. On Cohesive Modelling ofCarbon/Epoxy Composites Delamination and Fibre Compressive Failure

    Detta är en avhandling från Göteborg : Chalmers University of Technology

    Författare :Daniel Svensson; Högskolan i Skövde.; Högskolan i Skövde.; [2015]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Technology; Teknik; Mechanics of Materials; Materialmekanik; CFRP; Cohesive zone model; J-integral; LEFM; Delamination; Compressive failure;

    Sammanfattning : Carbon Fibre Reinforced Polymers are widely used in engineering applications where weight saving and high mechanical performance are a key factors. However, an inheren tweakness of laminated CFRP:s is there relatively low resistance to delamination. Therst part of this thesis is devoted to extract cohesive laws associated with delamination. LÄS MER

  3. 3. Failure of thermal barrier coatings under thermal and mechanical fatigue loading : microstructural observations and modelling aspects

    Detta är en avhandling från Linköping : Linköpings universitet

    Författare :Håkan Brodin; Linköpings universitet.; Linköpings universitet.; [2004]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; thermal barrier coating; TBC; delamination; crack initiation; crack propagation; crack growth; oxidation; alumina; spinel; MCrAIY; diffusion; fatigue; modelling; modeling; degradation; TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : Industrial and air-borne gas turbine hot components suffer from creep, oxidation, corrosion and microstructural degradation if not shielded from the hot and aggressive combustion gases. Two major strategies commercially available are adopted; film cooling by pressurised air and application of protective coatings. LÄS MER

  4. 4. Individual Failure Rate Modelling and Exploratory Failure Data Analysis for Power System Components

    Detta är en avhandling från Stockholm : KTH Royal Institute of Technology

    Författare :Jan Henning Jürgensen; KTH.; [2018]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Asset management; condition monitoring; failure rate; failure rate modeling; Electrical Engineering; Elektro- och systemteknik;

    Sammanfattning : A set of vital societal functions such as health and safety are necessary for today's society to function and to secure the life of its individuals. Infrastructure is required to provide and maintain these functions. LÄS MER

  5. 5. Design of Thermal Barrier Coatings A modelling approach

    Detta är en avhandling från Trollhättan : University West

    Författare :Nicholas Curry; Mohit Kumar Gupta; Högskolan Väst.; Högskolan Väst.; [2014]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Manufacturing and materials engineering; Produktions- och materialteknik; Industrial Gas Turbine; Aero Turbine; Thermal Barrier Coating; Atmospheric Plasma Spraying; Suspension Plasma Spraying; Thermal Conductivity; Thermo-cyclic fatigue; Thermal Shock; Thermal barrier coatings; Microstructure; Thermal conductivity; Young’s modulus; Interface roughness; Thermally grown oxide; Lifetime; Finite element modelling; Design;

    Sammanfattning : Atmospheric plasma sprayed (APS) thermal barrier coatings (TBCs) are commonly used for thermal protection of components in modern gas turbine application such as power generation, marine and aero engines. TBC is a duplex material system consisting of an insulating ceramic topcoat layer and an intermetallic bondcoat layer. LÄS MER