Sökning: "drilling"

Visar resultat 1 - 5 av 157 avhandlingar innehållade ordet drilling.

1. 1. Expert system for hole engineering with special reference to position accuracy when drilling

   Författare :Jacek K Kaminski; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; expert system; machining costs; feed; cutting speed; drilling data; position accuracy; twisted drill; drilling; hole machining sequances;

   Sammanfattning : .... LÄS MER

3. 2. Parameters optimization of oil well drilling operation

   Författare :Ali Darwesh; Thorkild Maack Rasmussen; Nadhir Al-Ansari; Daniel Ask; Bernt Sigve Aadnøy; Luleå tekniska universitet; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Bazian Block; Kurdistan; Iraq; Optimization; Drilling Parameters; Rate of Penetration; Wiper trips; Kicks; Pay zone; Bourgoyne and Young model; Exploration Geophysics; Prospekteringsgeofysik;

   Sammanfattning : In the beginning of 2005, the ministry of natural resources in the Kurdistan region of Iraq dividedits territory into more than 50 oil blocks based on geological setting. These oil blocks were awardedlater to different international oil companies for oil investments based on Production SharingContracts (PSCs). LÄS MER

4. 3. Positional Accuracy of Drilled Holes

   Författare :Jacek K Kaminski; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; corresponding cutting forces; chip areas; workpiece material; drill wandering; rigidity; drill length; hole-making; surface slope; hole positional accuracy; drilling; conventional point geometry; high-speed steel twist drills; cutting resistance;

   Sammanfattning : When selecting hole-making sequences, the positional accuracy mainly is determined during the first drilling operation. This dissertation consists of three papers which consider the influence of various factors on hole positional accuracy when drilling in inclined workpieces using high-speed steel twist drills with conventional point geometry. LÄS MER

5. 4. On the Nature of Cemented Carbide Wear in Rock Drilling

   Författare :Ulrik Beste; Staffan Jacobson; Mikael Olsson; Uppsala universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materials science; cemented carbide; wear; rock drilling; rock; Materialvetenskap; Materials science; Teknisk materialvetenskap;

   Sammanfattning : WC/Co cemented carbide is a composite material for highly demanding wear applications. The unique combination of hardness (from the WC-phase) and toughness (from the binder Co) gives a material especially suitable for rock drilling. LÄS MER

7. 5. Water powered percussive rock drilling : process analysis, modelling and numerical simulation

   Författare :Göran Tuomas; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Vattenteknik; Water Resources Engineering;

   Sammanfattning : This thesis is devoted to problems, processes and systems related to the recently developed water powered percussive rock drilling method. The technology, which uses ordinary water to drive down-the-hole hammers, has been used to produce more than 6 million meters of blast holes within the mining industry. LÄS MER