Sökning: "dispersive materials"

Visar resultat 21 - 25 av 149 avhandlingar innehållade orden dispersive materials.

1. 21. Microstructure and Inclusion Characteristics in Steels with Ti-oxide and TiN Additions

   Författare :Wangzhong Mu; Pär Jönsson; Keiji Nakajima; Casper Van der Eijk; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; intragranular ferrite; oxide metallurgy; inclusion engineering; titanium nitride; titanium oxide; inclusion size; heterogeneous nucleation; critical diameter; confocal laser scanning microscopy CLSM ; differential scanning calorimetry DSC ; continuous cooling transformation CCT diagram.; Materials Science and Engineering; Teknisk materialvetenskap;

   Sammanfattning : Non-metallic inclusions in steels are generally considered to be detrimental for mechanical properties. However, it has been recognized that certain inclusions, such as Ti-oxide and TiN, can serve as potent nucleation sites for the formation of intragranular ferrite (IGF) in low-alloy steels. LÄS MER

3. 22. A Study of Parameters and Properties Influencing the Size, Morphology and Oxygen Content of Water Atomized Metal Powders

   Författare :Fredrik Persson; Pär Jönsson; Christopher Neil Hulme; Lauri Holappa; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Teknisk materialvetenskap; Materials Science and Engineering;

   Sammanfattning : The production of metal powders by water atomization is a well-established process, which can be used to produce a wide range of particle sizes for different applications. In general, there is a lack of detailed knowledge about what process parameters that affect the powder properties for water atomized metal powders. LÄS MER

4. 23. Microstructure of a cubic boron nitride tool material and its degradation during hard turning operations

   Författare :Jenny Angseryd; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; EDX; adherent layer; cBN; PCBN; SEM; TEM; EELS and APT; wear; EFTEM;

   Sammanfattning : Abstract. Polycrystalline cubic boron nitride (PCBN) materials are widely used in turning operations of hardened steels due to their beneficial mechanical properties like maintained high hardness at elevated temperatures, adequate toughness and for being more chemically stable towards iron compared to diamond at temperatures typical for turning operations. LÄS MER

5. 24. Microstructure of Zirconium Alloys Oxidized in Steam

   Författare :Pia Tejland; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; EDX; ADF; TEM; Zircaloy-2; FIB-SEM; STEM; GD-OES; SPP; SEM; Zirconium; HAADF;

   Sammanfattning : Zirconium alloys are widely used in nuclear reactors as fuel cladding tubes because of their low thermal neutron capture cross-section, good corrosion properties and satisfactory mechanical properties. However, the main limiting factor of these materials is the oxidation behavior. LÄS MER

7. 25. Assessment of bio-based fuel ash effects on magnesia refractory materials in quicklime production kilns

   Författare :Naresh Kumar Wagri; Britt M. Andersson; Markus Carlborg; Markus Broström; Matias Eriksson; Bengt-Johan Skrifvars; Umeå universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Refractory corrosion; ash slag intrusion; lime kiln; MgO refractory; coal ash; olive pomace ash; biomass fuel; crushing strength; potassium K ; silicon Si .; Materials Science; materialvetenskap;

   Sammanfattning : Limestone is calcined into quicklime in lime kilns at temperatures above 1000°C. Heat is supplied through combustion inside the kilns, which are insulated with a lining of refractory bricks to mitigate heat loss and to protect the kiln from the hot, chemically aggressive, and mechanically abrasive environment. LÄS MER