Avancerad sökning
Visar resultat 1 - 5 av 149 avhandlingar som matchar ovanstående sökkriterier.
1. Modeling the Microstructure Evolution During and After Hot Working in Martensitic Steel
Sammanfattning : In this study, the goal is to predict the microstructure evolution during and after the hot working of a martensitic stainless steel with 13% chromium using a physically-based model in the form of a MATLAB toolbox. This model is based on dislocation density theory and consists of coupled sets of evolution equations for dislocation, vacancies, recovery, recrystallization, and grain growth. LÄS MER
2. Delubrication of Chromium Prealloyed Powder Metallurgy Steels
Sammanfattning : Consolidation of steel components produced by means of powder metallurgy (PM) is achieved typically through compaction and sintering. During consolidation, final dimensions of the part are already achieved after compaction, while sintering imparts strength to the components. LÄS MER
3. Minerals and their dispersive interaction with bitumen
Sammanfattning : .... LÄS MER
4. Heat treatment of Al-Si-Cu-Mg casting alloys
Sammanfattning : Environmental savings can be made by increasing the use of aluminium alloys in the automotive industry as the vehicles can be made lighter. Increasing the knowledge about the heat treatment process is one task in the direction towards this goal. The aim of this work is to investigate and model the heat treatment process for Al-Si casting alloys. LÄS MER
5. Nanoscale Characterisation of Barriers to Electron Conduction in ZnO Varistor Materials
Sammanfattning : The work presented in this thesis is concerned with the microstructure of zinc oxide varistor materials used in surge protecting devices. This class of material has been characterised with special emphasis on the functional microstructure and the development of the microstructure during sintering. LÄS MER