Sökning: "cutting operation"

Visar resultat 1 - 5 av 49 avhandlingar innehållade orden cutting operation.

  1. 1. Tool Life and Cutting Data Modelling in Metal Cutting : Testing, Modelling and Cost Performance

    Författare :Daniel Johansson; Industriell Produktion; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; metal cutting; tool life; tool wear; cutting data; process cost; Colding model; part cost;

    Sammanfattning : One of the most important production processes in industry is metal cutting. If a product is not a machined metal part, it is likely that the mould, die and tools used to produce the product or parts of the product are machined. LÄS MER

  2. 2. Vibrations in Metal Cutting : Measurement, Analysis and Reduction

    Författare :Linus Pettersson; []

    Sammanfattning : Vibration and noise in metal cutting are ubiquitous problems in the workshop. The turning operation is one kind of metal cutting that exhibits vibration related problems. Today the industry aims at smaller tolerances in surface finish. Harder regulations in terms of the noise levels in the operator environment are also central. LÄS MER

  3. 3. Machinability Testing of Materials in Metal Cutting with Focus on Compacted Graphite Iron and Cutting Fluids

    Författare :Varun Nayyar; Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; UTS.; Boring; Drilling; Cutting Fluid; Turning; Milling; Force; Wear; Force; Torque; Compressed air; CGI; Hardness; Tool Life; Material Properties; Chip Microstructure; Tapping;

    Sammanfattning : Due to the stringent demands for lower emission from trucks require better mechanical properties of the material to be used in the engines. Better efficiency necessitates higher peak pressure in the engines and for traditionally used material, Flake Graphite Iron (FGI), the mechanical properties starts to reach the limit of what the material can withstand. LÄS MER

  4. 4. On Transfer of Work Material to Tools

    Författare :Jannica Heinrichs; Staffan Jacobson; Urban Wiklund; Uppsala universitet; []
    Nyckelord :Tribology; Friction; Forming; Cutting; Galling; Material transfer; Tribological coatings; Surface finish; Micro mechanisms; Aluminium; Materialvetenskap; Materials Science;

    Sammanfattning : Bulk forming and cutting are widely used to shape metals in industrial production. Bulk forming is characterized by large strains, extensive plastic deformation and large surface expansions. Cutting is characterized by high speeds, high pressures and high temperatures. LÄS MER

  5. 5. The Metallurgical Aspects of Machinability in Prehardened Mould Steels

    Författare :Seyyed Mohammad Hamed Hoseiny; Chalmers University of Technology; []
    Nyckelord :Bainitic structure; Tool Life; Cutting Temperature; Cutting Force; Machinability; Microstructure; Tempered Martensite; Plastic Mould Steels;

    Sammanfattning : High economical efficiency obtained by utilizing prehardened mould steels in plastic mould making has increased the usage of these types of steels to a great extent. Generally, prehardened mould steels are applied for large moulds and moulds for moderate production runs, and one of the advantages of using this type of steel is that no heat treatment is necessary for putting the mould in use. LÄS MER