Sökning: "current control"

Visar resultat 11 - 15 av 1521 avhandlingar innehållade orden current control.

  1. 11. Realising full-scale control in wastewater treatment systems using in situ nutrient sensors

    Författare :Pernille Ingildsen; Industriell elektroteknik och automation; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; reglerteknik; robotteknik; Automatiska system; control engineering; Instrumentation; Wastewater treatment; Control; Full-scale plants; Control structures; Electronics and Electrical technology; Elektronik och elektroteknik; robotics; Automation; kontroll av utsläpp; pollution control; Miljöteknik; Environmental technology;

    Sammanfattning : Abstract A major change in paradigm is taking place in the operation of wastewater treatment plants as automatic process control is becoming feasible. This change is due to a number of different reasons, not least the development of online nutrient sensors, which measure the key parameters in the biological nutrient removal processes, i.e. LÄS MER

  3. 12. Voltage sag ride-through of AC drives : control and analysis

    Författare :Kai Pietiläinen; Hans-Peter Nee; Olli Pyrhönen; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Electronic measurement and instrumentation; Elektronisk mät- och apparatteknik;

    Sammanfattning : This thesis focuses on controller design and analysis for induction motor (IM) drives, flux control for electrically excited synchronous motors with damper windings (EESMs), and to enhance voltage sag ride-through ability and analysis for a wind turbine application with a full-power grid-connected active rectifier. The goal is to be able to use the existing equipment, without altering the hardware. LÄS MER

  4. 13. Look-ahead Control of Heavy Trucks utilizing Road Topography

    Författare :Erik Hellström; Lars Nielsen; Torkel Glad; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; predictive control; dynamic programming; Automatic control; Reglerteknik;

    Sammanfattning : The power to mass ratio of a heavy truck causes even moderate slopes to have a significant influence on the motion. The velocity will inevitable vary within an interval that is primarily determined by the ratio and the road topography. LÄS MER

  5. 14. Predictive Control of Hybrid Electric Vehicles on Prescribed Routes

    Författare :Lars Johannesson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Energy Management; Powertrain Control; Predictive Control; Dynamic Programming; Vehicle Telematics; Hybrid Electric Vehicle; Hybrid Electric Powertrains;

    Sammanfattning : At the highest level in the powertrain control system in a hybrid electric vehicle an energy management controller interprets the driver’s pedal actions as a torque that is to be delivered at the powertrain output. The energy management controller distributes this torque between the engine and the electric machines and decides when to change gear and when to turn off the engine for pure electric propulsion. LÄS MER

  7. 15. Dynamic Access Control for Industrial Systems

    Författare :Björn Leander; Hans Hansson; Aida Causevic; Sasikumar Punnekkat; Tomas Lindström; Marina Krotofil; Mälardalens universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cybersecurity; Industrial Automation and Control Systems; Industry 4.0; Access Control; Computer Science; datavetenskap;

    Sammanfattning : Industrial automation and control systems (IACS) are taking care of our most important infrastructures, providing electricity and clean water, producing medicine and food, along with many other services and products we take for granted. The continuous, safe, and secure operation of such systems are obviously of great importance. LÄS MER